Panasonic H-HS35100PP / H-HS35100E / H-HS35100GK Service Manual ▷ View online
10
4.2.
Important notice of disassembly and assembly
4.2.1.
About the LENS MOUNT RUBBER
1. Install the LENS MOUNT RUBBER
2. Install the L MOUNT UNIT
11
4.2.2.
About the OIS switch
1. Note when the OIS switch is installed.
Apply "CEMEDINE SUPER X 8008 BLACK" (Commercial item) to the following 2 points after installing the OIS switch.
12
4.3.
Disassembly procedure
Important:
It must be performed inside of satisfied clean level.
(Satisfied clean level: Less than class 10,000
(FederalStandard 209D))
(Satisfied clean level: Less than class 10,000
(FederalStandard 209D))
4.3.1.
Removal of the Decoration Ring
1. Decoration ring is stuck on the Lens top unit .
2. Put the sheet so that the lens glass is fully covered.
3. Insert the small flat blade screwdriver to Gap
2. Put the sheet so that the lens glass is fully covered.
3. Insert the small flat blade screwdriver to Gap
(between the decoration ring and lens glass),
and peel off the decoration ring gently.
and peel off the decoration ring gently.
4.3.2.
Removal of the the Lens top unit
1. Remove the 3 screws (A).
4.3.3.
Removal of the 1st lens block
1. Remove the 1st dust proof rubber and the 3 screws (B).
13
4.3.4.
Removal of the Shading frame
1. Remove the 3 screws (C).
4.3.5.
Removal of the L mount unit
1. Remove the screw (D) and the 4 screws (E).
Click on the first or last page to see other H-HS35100PP / H-HS35100E / H-HS35100GK service manuals if exist.