Panasonic DMC-TZ7EB / DMC-TZ7EE / DMC-TZ7EF / DMC-TZ7EG / DMC-TZ7EP / DMC-TZ7GC / DMC-TZ7GJ / DMC-TZ7GN / DMC-TZ7SG / DMC-ZS3GD / DMC-ZS3GH / DMC-ZS3GK / DMC-ZS3GT / DMC-ZS3P / DMC-ZS3PC / DMC-ZS3PU Service Manual ▷ View online
9
3.4.
How to Define the Model Suffix (NTSC or PAL model)
There are eight kinds of DMC-TZ7/ZS3, regardless of the colours.
• a) DMC-TZ7 (Japan domestic model.) /SG
• b) DMC-ZS3P/PC
• c) DMC-TZ7EB/EF/EG/EP
• d) DMC-TZ7EE
• e) DMC-ZS3GD
• f ) DMC-ZS3GT
• g) DMC-TZ7GN
• h) DMC-ZS3GK
• i ) DMC-TZ7GC/GJ, ZS3GH/PU
• b) DMC-ZS3P/PC
• c) DMC-TZ7EB/EF/EG/EP
• d) DMC-TZ7EE
• e) DMC-ZS3GD
• f ) DMC-ZS3GT
• g) DMC-TZ7GN
• h) DMC-ZS3GK
• i ) DMC-TZ7GC/GJ, ZS3GH/PU
What is the difference is that the ”INITIAL SETTINGS” data which is stored in Flash ROM mounted on Main PCB.
3.4.1.
Defining methods
To define the model suffix to be serviced, refer to the nameplate which is putted on the bottom side of the Unit.
10
NOTE:
After replacing the MAIN PCB, be sure to achieve adjustment.
The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-PAVC” web-site
in “TSN system”, together with Maintenance software.
The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-PAVC” web-site
in “TSN system”, together with Maintenance software.
11
3.4.2.
INITIAL SETTINGS:
After replacing the MAIN PCB, be sure to perform the initial settings after achieving the adjustment by ordering the following proce-
dure in accordance with model suffix of the unit.
dure in accordance with model suffix of the unit.
1. IMPORTANT NOTICE:
Before proceeding Initial settings, be sure to read the following CAUTIONS.
2. PROCEDURES:
• Precautions: Read the above "CAUTION 1" and "CAUTION 2", carefully.
• Preparation:
• Preparation:
1. Attach the Battery or AC Adaptor with a DC coupler to the unit.
2. Set the mode dial to the NORMAL PICTURE mode.
2. Set the mode dial to the NORMAL PICTURE mode.
NOTE: If the mode dial position is other than NORMAL PICTURE mode, it does not display the initial settings menu.
• Step 1. The temporary cancellation of "INITIAL SETTINGS":
Set the REC/PLAYBACK selector switch to “REC (Camera mark)”.
While keep pressing “UP of Cursor button” and DISPLAY button simultaneously, turn the Power on.
While keep pressing “UP of Cursor button” and DISPLAY button simultaneously, turn the Power on.
• Step 2. The cancellation of "INITIAL SETTINGS":
Set the REC/PLAYBACK selector switch to "PLAYBACK".
Press "UP of Cursor button" and [DISPLAY button simultaneously, then turn the Power off.
Press "UP of Cursor button" and [DISPLAY button simultaneously, then turn the Power off.
• Step 3. Turn the Power on:
Set the REC/PLAYBACK selector switch to "REC (Camera mark)", and then turn the Power on.
• Step 4. Display the "INITIAL SETTINGS" menu:
NOTE: If the unit is other than NORMAL PICTURE mode, it does not display the initial settings menu.
While keep pressing MENU/SET and "RIGHT of Cursor button" simultaneously, turn the Power off.
The "INITIAL SETTINGS" menu is displayed.
There are two kinds of ”INITIAL SETTINGS” menu form as follows:
[CASE 1. After replacing MAIN P.C.B.]
[Other than "EG, EP, EF and EB" models : (VEP56081A is used as a Main P.C.B.)]
While keep pressing MENU/SET and "RIGHT of Cursor button" simultaneously, turn the Power off.
The "INITIAL SETTINGS" menu is displayed.
There are two kinds of ”INITIAL SETTINGS” menu form as follows:
[CASE 1. After replacing MAIN P.C.B.]
[Other than "EG, EP, EF and EB" models : (VEP56081A is used as a Main P.C.B.)]
When MAIN P.C.B. has just been replaced, all of the model suffix are displayed as follows. (Four pages in total)
12
[Only for "EG, EP, EF and EB" models : (VEP56081C is used as a Main P.C.B.)]
When MAIN P.C.B. has just been replaced, only 4 model suffix are displayed as follows.
[CASE 2. Other than “After replacing MAIN P.C.B.”]
• Step 5. Chose the model suffix in "INITIAL SETTINGS": (Refer to "CAUTION 1")
[Caution: After replacing MAIN P.C.B.]
(Especially, other than "EG, EP, EF and EB" models : (VEP56081A is used as a Main P.C.B.)).
The model suffix can been chosen, JUST ONE TIME.
Once one of the model suffix have been chosen, the model suffix lists will not be displayed, thus, it can be changed.
Therefore, select the area carefully.
Select the area with pressing "UP / DOWN of Cursor buttons".
The model suffix can been chosen, JUST ONE TIME.
Once one of the model suffix have been chosen, the model suffix lists will not be displayed, thus, it can be changed.
Therefore, select the area carefully.
Select the area with pressing "UP / DOWN of Cursor buttons".
• Step 6. Set the model suffix at "INITIAL SETTINGS":
Press the "RIGHT of Cursor buttons".
The only set area is displayed. Press the "RIGHT of Cursor buttons" after confirmation.
(The unit is powered off automatically.)
The only set area is displayed. Press the "RIGHT of Cursor buttons" after confirmation.
(The unit is powered off automatically.)
• Step 7. CONFIRMATION:
Confirm the display of "PLEASE SET THE CLOCK" in concerned language when the unit is turned on again.
When the unit is connected to PC with USB cable, it is detected as removable media.
When the unit is connected to PC with USB cable, it is detected as removable media.
1) As for your reference, major default setting condition is as shown in the following table.
Default setting (After "INITIAL SETTINGS")
Default setting (After "INITIAL SETTINGS")
MODEL
VIDEO OUTPUT
LANGUAGE
DATE
REMARKS
a)
DMC-TZ7 (Japan domestic model)
NTSC
Japanese
Year/Month/Date
b)
DMC-TZ7EB
PAL
English
Date/Month/Year
c)
DMC-TZ7EE
PAL
Russian
Date/Month/Year
d)
DMC-TZ7EF
PAL
French
Date/Month/Year
e)
DMC-TZ7EG
PAL
English
Date/Month/Year
f)
DMC-TZ7EP
PAL
English
Date/Month/Year
g)
DMC-TZ7GC
PAL
English
Date/Month/Year
h)
DMC-TZ7GJ
PAL
Thai
Date/Month/Year
i)
DMC-TZ7GN
PAL
English
Date/Month/Year
j)
DMC-TZ7SG
PAL
English
Date/Month/Year
k)
DMC-ZS3GD
NTSC
Korean
Year/Month/Date
l)
DMC-ZS3GH
PAL
English
Date/Month/Year
m)
DMC-ZS3GK
PAL
Chinese (simplified)
Year/Month/Date
No Underwater mode.
n)
DMC-ZS3GT
NTSC
Chinese (Traditional)
Year/Month/Date
o)
DMC-ZS3P
NTSC
English
Month/Date/Year
p)
DMC-ZS3PC
NTSC
English
Month/Date/Year
q)
DMC-ZS3PU
NTSC
Spanish
Month/Date/Year
Click on the first or last page to see other DMC-TZ7EB / DMC-TZ7EE / DMC-TZ7EF / DMC-TZ7EG / DMC-TZ7EP / DMC-TZ7GC / DMC-TZ7GJ / DMC-TZ7GN / DMC-TZ7SG / DMC-ZS3GD / DMC-ZS3GH / DMC-ZS3GK / DMC-ZS3GT / DMC-ZS3P / DMC-ZS3PC / DMC-ZS3PU service manuals if exist.