DOWNLOAD Panasonic DMC-TZ7EB / DMC-TZ7EE / DMC-TZ7EF / DMC-TZ7EG / DMC-TZ7EP / DMC-TZ7GC / DMC-TZ7GJ / DMC-TZ7GN / DMC-TZ7SG / DMC-ZS3GD / DMC-ZS3GH / DMC-ZS3GK / DMC-ZS3GT / DMC-ZS3P / DMC-ZS3PC / DMC-ZS3PU Service Manual ↓ Size: 4.62 MB | Pages: 63 in PDF or view online for FREE

41

The grease apply point of lens unit are as follows.
Apply grease additionally in the specified position if necessary.
When the grease is applied, use a toothpick and apply thinly.

• Focus motor nut moving part

- Grease: RFKZ0472
- Amount of apply: 3 - 5 mg

• 4th lens frame positioning pole, guide pole

- Grease: RFKZ0472
- Amount of apply: 0.15 - 0.35 mg

42

The relation between Replaced part and Necessary Adjustment is shown in the following table.
When concerned part is replaced, be sure to achieve the necessary adjustment(s).
As for Adjustment condition/procedure, consult the “Adjustment Manual” which is available in Adjustment software.
The Adjustment software is available at “TSN Website”, therefore, access to “TSN Website” at “Support Information from NWBG/
VDBG-PAVC”.
NOTE:

After adjustments have been terminated, make sure to achieve “INITIAL SETTINGS”.

*1 This adjustment is necessary, not only replacing CCD unit but also removing it from the lens unit.
NOTE:

*There is no LCD adjustment in this model.

Replaced Part

Adjustment Item

Main P.C.B.

VENUS 

(IC6001)

Flash-ROM 

(IC6002)

Lens Part 

(Excluding 

CCD)

CCD Unit

Camera
Section

OIS hall element adjustment
(OIS) 

O

O

O

O

-

Back focus adjustment
(BF)

O

O

O

O

O*1

Shutter adjustment
(SHT)

O

O

O

O

O

ISO sensitivity adjustment
(ISO)

O

O

O

O

O

AWB adjustment High brightness coloration inspection
(WBL)

O

O

O

O

O

CCD white scratch compensation
(WKI)

O

O

O

-

O*1

CCD black scratch compensation
(BKI)

O

O

O

-

O*1

Venus zoom inspection
(PZM)

O

O

O

-

-

Monitor linearity inspection
(MLN)

O

O

O

O

O

Color reproduction inspection /mic inspection
(COL)

O

O

O

O

O

43

Do not touch the surface of lens, Viewfinder and LCD Panel with your hand.
When cleaning the lens, use air-Blower to blow off the dust.
When cleaning the LCD Panel, dampen the lens cleaning paper with lens cleaner, and the gently wipe the their surface.
Note:

The Lens Cleaning KIT ; VFK1900BK(Only supplied as 10 set/Box) is available as Service Aid.

S-1

S1. About Indication of The Schematic Diagram ............................ S-1
S1.1. Important Safety Notice......................................................... S-1

S2. Voltage Chart ........................................................................... S-2
S2.1. Top Operation P.C.B. ............................................................. S-2
S2.2. Flash P.C.B. .......................................................................... S-2

S3. Block Diagram .......................................................................... S-3
S3.1. Overall Block Diagram .......................................................... S-3

S4. Schematic Diagram .................................................................. S-4
S4.1. Interconnection Diagram ....................................................... S-4
S4.2. Top Operation Schematic Diagram ....................................... S-5
S4.3. Top MIC Schematic Diagram ................................................ S-6
S4.4. Flash Schematic Diagram ..................................................... S-7
S4.5. CCD Flex Schematic Diagram .............................................. S-8
S4.6. Lens Flex Schematic Diagram .............................................. S-9

S5. Print Circuit Board .................................................................. S-10
S5.1. Top Operation P.C.B. ........................................................... S-10
S5.2. Flash P.C.B. ........................................................................ S-11
S5.3. CCD Flex P.C.B. .................................................................. S-12
S5.4. Lens Flex P.C.B. .................................................................. S-13

S6. Replacement Parts List .......................................................... S-15

S7. Exploded View. ....................................................................... S-19
S7.1. Frame and Casing Section.................................................. S-19
S7.2. Packing Parts and Accessories Section. ............................. S-20

Table of contents

DSC0903018CE

(R)...........Red Type (only EB/EF/EG/EP/P)

Vol. 1

(S)...........Silver Type (except EF/GJ/GD)

Colour

(K)...........Black Type
(A)...........Blue Type (only EE/EG/EP/P/PC/PU)
(T)...........Brown Type (only EB/EF/EG/EP/GC/SG/GH/GK)

Model No.
DMC-TZ7EB
DMC-TZ7EE
DMC-TZ7EF
DMC-TZ7EG
DMC-TZ7EP
DMC-TZ7GC
DMC-TZ7GJ
DMC-TZ7GN

DMC-TZ7SG
DMC-ZS3GD
DMC-ZS3GH
DMC-ZS3GK
DMC-ZS3GT
DMC-ZS3P
DMC-ZS3PC
DMC-ZS3PU

Digital Camera

Name of Signal

OFTR

FEP

This signal is connected
to the FEP schematic diagram.

Circuit name being connected.

6.Use the parts number indicated on the Replacement Parts List .

7.Indication on Schematic diagrams:

5.The voltage being indicated here may be include observational-error (deviation) due to

internal-resistance and/or reactance of equipment. Therefore, handle the value
indicated on here as reference.

4.Although the voltage and waveform available on here is measured with standard frame,

it may be differ from actual measurement due to modification of circuit and so on.

3.The voltage being indicated on the schematic diagram is measured in

"Standard-Playback" mode when there is no specify mode is mentioned.

2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.

when the TP (Test Point) indicated as " " mark.

1.Although reference number of the parts is indicated on the P.C.B. drawing and/or

schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.

FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.

COMPONENTS IDENTIFIED WITH THE MARK

HAVE THE SPECIAL CHARACTERISTICS