Panasonic DMC-LZ8P / DMC-LZ8PC / DMC-LZ8PL / DMC-LZ8E / DMC-LZ8EB / DMC-LZ8EE / DMC-LZ8EF / DMC-LZ8EG / DMC-LZ8GC / DMC-LZ8GK / DMC-LZ8GN / DMC-LZ8EE9 Service Manual ▷ View online
9
3.4.2.
INITIAL SETTINGS:
When you replace the Main PCB, be sure to perform the initial settings after achieving the adjustment by ordering the following pro-
cedure in accordance with model suffix of the unit.
1. IMPORTANT NOTICE:
cedure in accordance with model suffix of the unit.
1. IMPORTANT NOTICE:
Before proceeding Initial settings, be sure to read the following CAUTIONS.
2. PROCEDURES:
• Precautions: Proceed the picture back up from the unit. (Refer to above "CAUTION 2")
• Preparation. Set the Mode dial to "P" (Program AE mode).
• Preparation. Set the Mode dial to "P" (Program AE mode).
Set the [REC]/[PLAYBACK] selector switch to "[REC] (Red camera mark)".
• Step 1. The temporary cancellation of initial setting:
Set the [REC]/[PLAYBACK] selector switch to “[ REC ] (Red camera mark)”.
While keep pressing [ E.ZOOM ] and “[ UP ] of Cursor buttons” simultaneously, turn the Power on.
While keep pressing [ E.ZOOM ] and “[ UP ] of Cursor buttons” simultaneously, turn the Power on.
• Step 2. The cancellation of initial setting:
Set the [REC]/[PLAYBACK] selector switch to “[ PALYBACK ]”.
Press [ E.ZOOM ] and “[ UP ] of Cursor buttons” simultaneously, then turn the Power off.
Press [ E.ZOOM ] and “[ UP ] of Cursor buttons” simultaneously, then turn the Power off.
• Step 3. Turn the Power on:
Set the [REC]/[PLAYBACK] selector switch to “[ REC ] (Red camera mark)”, and then turn the Power on.
• Step 4. Display the INITIAL SETTING:
While keep pressing [ MENU ] and “[ RIGHT ] of Cursor buttons” simultaneously, turn the Power off.
10
• Step 5. Set the INITIAL SETTING: (Refer to “CAUTION 1”)
[Caution for befor settings]
Once "NONE(JAPAN)" (Area for Japan) or "P" (Area for Noth America) is selected with "INITIAL SETTINGS", other areas will
not displayed even if "INITIAL SETTINGS" menu is displayed again, thus, the area can not be changed.
Select the area carefully.
not displayed even if "INITIAL SETTINGS" menu is displayed again, thus, the area can not be changed.
Select the area carefully.
Select the area with pressing “[ UP ] / [ DOWN ] of Cursor buttons”, and then press the “[ RIGHT ] of Cursor buttons”.
The only set area is displayed, and then press the “[ RIGHT ] of Cursor buttons” after confirmation.
(The unit is powered off automatically.)
Confirm the display of “PLEASE SET THE CLOCK” in English when the unit is turned on again.
(The unit is powered off automatically.)
Confirm the display of “PLEASE SET THE CLOCK” in English when the unit is turned on again.
• Step 6. CONFIRMATION:
The display shows “PLEASE SET THE CLOCK” when turn the Power on again.
When the unit is connected to PC with USB cable, it is detected as removable media.
(When the “GK” model suffix is selected, the display shows “PLEASE SET THE CLOCK” in Chinese.)
When the unit is connected to PC with USB cable, it is detected as removable media.
(When the “GK” model suffix is selected, the display shows “PLEASE SET THE CLOCK” in Chinese.)
1) As for your reference Default setting condition is given in the following table.
• Default setting (After “INITIAL SETTINGS”)
MODEL
VIDEO OUTPUT
LANGUAGE
DATE
REMARKS
a) DMC-LZ8P/PC/PL
NTSC
English
Month/Date/Year
b) DMC-LZ8E/EB/EG/GC/GN
PAL
English
Date/Month/Year
c) DMC-LZ8EF
PAL
French
Date/Month/Year
d) DMC-LZ8EE
PAL
Russian
Date/Month/Year
e) DMC-LZ8GK
PAL
Chinese (simplified)
Year/Month/Date
11
4 Specifications
12
5 Location of Controls and Components
Click on the first or last page to see other DMC-LZ8P / DMC-LZ8PC / DMC-LZ8PL / DMC-LZ8E / DMC-LZ8EB / DMC-LZ8EE / DMC-LZ8EF / DMC-LZ8EG / DMC-LZ8GC / DMC-LZ8GK / DMC-LZ8GN / DMC-LZ8EE9 service manuals if exist.