Panasonic DMC-LS60PC / DMC-LS60PL / DMC-LS60EB / DMC-LS60EE / DMC-LS60EF / DMC-LS60EG / DMC-LS60EGM / DMC-LS60GC / DMC-LS60GK / DMC-LS60GN Service Manual ▷ View online
29
8.5.4.
Assembly for the 2nd Lens Frame
Move Unit
Move Unit
30
8.6.
Removal of the CCD Unit
To prevent the CCD unit from catching the dust and dirt, do not
remove the CCD unit except for replacing.
remove the CCD unit except for replacing.
• Torx driver (T3) Part No. RFKZ0334
31
8.7.
Removal of the Focus Motor
1. Remove the cover to the indicated by arrow (A).
2. Unscrew the 1 screw (B).
3. Unsolder (4 points).
4. Remove the focus motor.
2. Unscrew the 1 screw (B).
3. Unsolder (4 points).
4. Remove the focus motor.
8.8.
The Applyment of Grease
Method
Method
The grease apply point of lens unit are as follows.
Apply grease additionally in the specified position if necessary.
When the grease is applied, use a toothpick and apply thinly.
Apply grease additionally in the specified position if necessary.
When the grease is applied, use a toothpick and apply thinly.
• Lead screw
- Grease: VFK1850 (Furoyl type)
- Amount of apply: 2 - 4 mg
- Amount of apply: 2 - 4 mg
• Guide pole
- Grease: VFK1829
- Amount of apply: 2 - 4 mg
- Amount of apply: 2 - 4 mg
32
9 Measurements and Adjustments
9.1.
Matrix Chart for Replaced Part and Necessary Adjustment
The relation between Replaced part and Necessary Adjustment is shown in the following table.
When concerned part is replaced, be sure to achieve the necessary adjustment(s).
As for Adjustment condition/procedure, consult the “Adjustment Manual” which is available in Adjustment software.
The Adjustment software is available at “TSN Website”, therefore, access to “TSN Website” at “Support Information from NWBG/
VDBG-PAVC”.
NOTE:
When concerned part is replaced, be sure to achieve the necessary adjustment(s).
As for Adjustment condition/procedure, consult the “Adjustment Manual” which is available in Adjustment software.
The Adjustment software is available at “TSN Website”, therefore, access to “TSN Website” at “Support Information from NWBG/
VDBG-PAVC”.
NOTE:
After adjustments have been terminated, make sure to achieve “INITIAL SETTINGS”.
NOTE:
*There is no LCD adjustment in this model.
*There is no CCD Black scratch compensation adjustment (BKI) in this model.
*There is no CCD Black scratch compensation adjustment (BKI) in this model.
Replaced Part
Adjustment Item
Main P.C.B.
VENUS
(IC6001)
Flash-ROM
(IC6002)
Lens Part
(Excluding
CCD)
CCD Unit
Camera
Section
Section
OIS hall element adjustment
(OIS)
(OIS)
O
O
O
O
Back focus adjustment
(BF)
(BF)
O
O
O
O
Shutter adjustment
(SHT)
(SHT)
O
O
O
O
O
ISO sensitivity adjustment
(ISO)
(ISO)
O
O
O
O
O
AWB adjustment
High brightness coloration inspection
(WBL)
High brightness coloration inspection
(WBL)
O
O
O
O
O
CCD white scratch compensation
(WKI)
(WKI)
O
O
O
O
Click on the first or last page to see other DMC-LS60PC / DMC-LS60PL / DMC-LS60EB / DMC-LS60EE / DMC-LS60EF / DMC-LS60EG / DMC-LS60EGM / DMC-LS60GC / DMC-LS60GK / DMC-LS60GN service manuals if exist.