DOWNLOAD Panasonic DMC-G3KEE Service Manual ↓ Size: 8.05 MB | Pages: 81 in PDF or view online for FREE

21

This touch panel is a type that detects pressure.

‡

If you use a commercially available liquid crystal protection
sheet, please follow the instructions that accompany the sheet.
(Some liquid crystal protection sheets may impair visibility or
operability.)

‡

If a commercially available protection sheet is used, a little extra
pressure may be required if you notice that the touch panel is

not responsive.

‡

Avoid having the hand holding the camera accidently apply
pressure to the touch panel. Doing so may affect the touch panel
operation.

‡

Do not press on the LCD monitor with hard pointed tips, such as
ball point pens.

‡

Do not operate with your fingernails.

‡

Wipe the LCD monitor with dry soft cloth when it gets dirty with finger prints and others.

‡

Do not scratch or press the LCD monitor too hard.

‡

For information about the icons displayed on the touch panel.

It is easier to use the stylus pen (supplied) for detailed operation or if it is hard to operate
with your fingers.
‡

Only use the supplied

stylus pen

.

‡

Do not place it where small children can reach.

To touch and release the touch panel.

A movement without releasing the touch
panel.

Use this to perform tasks such as selecting
icons or images displayed on the touch
panel.
‡

When selecting features using the touch
panel, be sure to touch the center of the
desired icon.

This is used to move the AF area, operate
the slide bar, etc.
This can also be used to move to the next
image during playback, etc.

22

1. General description

This unit is equipped with history of error code memory function, and can be memorized 16 error codes in sequence from the
latest. When the error is occurred more than 16, the oldest error is overwritten in sequence.
The error code is not memorized when the power supply is shut down forcibly.
(i.e., when the unit is powered on by the battery, the battery is pulled out)
The error code is memorized to FLASH-ROM when the unit has just before powered off.

2. How to display

The error code can be displayed by ordering the following procedure:

• Preparation

Attach the fully charged Battery, and insert the SD memory card.
Confirm that it is not intelligent auto mode [iA] or intelligent auto plus mode [iA+].

If the unit is intelligent auto mode [iA] or intelligent auto plus mode [iA+], it does not display the initial settings menu.

• Step 1. The temporary cancellation of “INITIAL SETTINGS”:

While pressing [ Q.MENU/Fn2 ], [ DISP/Fn1 ] and "[ RIGHT ] of Cursor buttons" simultaneously, turn the Power on. 

• Step 2. Execute the error code display mode:

Press [ Q.MENU/Fn2 ], [ MENU/SET ] and "[ LEFT ] of Cursor buttons" simultaneously with the step 1 condition.
The display is changed as shown below when the above buttons are pressed simultaneously.
Normal display 

→  Error code display →  Camera information display →  Normal display →  .....

Example of Error Code Display

23

• Error Code List:

The error code consists of 8 bit data and it shows the following information.

Important notice about “Error Code List”
About "*" indication:
The third digit from the left is different as follows.

- In case of 0 (example: 2B001000)

When the third digit from the left shows “0”, this error occurred under the condition of INITIAL SETTINGS has been com-
pleted.
It means that this error is occurred basically at user side.

- In case of 8 (example: 2B801000)

When the third digit from the left shows "8", this error occurred under the condition of INITIAL SETTINGS has been
released.
(Example; Factory assembling-line before unit shipment, Service mode etc.)
It means that this error is occurred at service side.

• Step 3. How to exit from Error Code display mode:

Simply, turn the power off. (Since Error Code display mode is executed under the condition of temporary cancellation of 
“INITIAL SETTINGS”, it wake up with normal condition when turn off the power.)

The error code can not be initialized.

24