DOWNLOAD Panasonic DMC-FX30P / DMC-FX30PC / DMC-FX30PL / DMC-FX30EB / DMC-FX30EE / DMC-FX30EF / DMC-FX30EG / DMC-FX30EGM / DMC-FX30GC / DMC-FX30GD / DMC-FX30GK / DMC-FX30GN / DMC-FX30GT / DMC-FX30SG Service Manual ↓ Size: 3.27 MB | Pages: 52 in PDF or view online for FREE

Model
DMC-FX30P DMC-FX30PC DMC-FX30PL DMC-FX30EB DMC-FX30EE DMC-FX30EF DMC-FX30EG DMC-FX30EGM DMC-FX30GC DMC-FX30GD DMC-FX30GK DMC-FX30GN DMC-FX30GT DMC-FX30SG
Pages
52
Size
3.27 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / DIGITAL CAMERA
File
dmc-fx30p-dmc-fx30pc-dmc-fx30pl-dmc-fx30eb-dmc-fx3.pdf
Date

Panasonic DMC-FX30P / DMC-FX30PC / DMC-FX30PL / DMC-FX30EB / DMC-FX30EE / DMC-FX30EF / DMC-FX30EG / DMC-FX30EGM / DMC-FX30GC / DMC-FX30GD / DMC-FX30GK / DMC-FX30GN / DMC-FX30GT / DMC-FX30SG Service Manual ▷ View online

25
8.3.8.
Removal of the AF Assist P.C.B.
Fig. D11
8.3.9.
Removal of the Sub P.C.B.
Fig. D12
8.3.10.
Removal of the Battery Case.
Fig. D13
Fig. D14
8.3.11.
Removal of the Jack Door
Fig. D15
NOTE: (When Assembling)
Be sure to confirm the following points when assembling.
• The Screw is tightened enough.
• Assembling conditions are fine. (No distortion, no illegal-
space.)
• No dust and/or dirt on every Lens surfaces.
• LCD image is fine. (No dust and dirt on it, and no gradient
images.)
26
8.4.
Disassembly Procedure for the
Lens
NOTE: When Disassembling and Assembling for the Lens
1. To minimize the possibility of the CCD being dirt, perform
disassemble and/or assemble under the condition of the
CCD is being mounted. 
Disassembling procedures for the CCD unit, refer to item
8.6.
2. Take care that the dust and dirt are not entered into the
lens.
In case of the dust is putted on the lens, blow off them by
airbrush.
3. Do not touch the surface of lens.
4. Use lens cleaning KIT (BK)(VFK1900BK).
5. Apply the grease (VFK1829) to the point where is shown
to" Grease apply" in the figure.
When the grease is applied, use a toothpick and apply
thinly.
8.4.1.
Zoom Motor Unit, Master Frange
Unit, Direct/Drive Frame Unit and
1st Lens Frame/2nd Lens Frame
Move Unit
1. Unscrew the 4 screws (A).
2. Remove the zoom motor unit to the indicated by arrow.
3. Move the master frange unit to the indicated by arrow.
4. Turn the drive gear to the indicated by arrow fully.
5. Push the drive unit to the indicated by arrow from lens
side, and then remove the unit of drive/direct frame unit,
1st lens frame/2nd lens frame move unit from the fixed
frame unit.
27
6. Push the 1st lens frame unit to the indicated by arrow
from lens side, and then remove the unit of 1st lens
frame/2nd lens frame move unit from the drive/direct
frame unit.
8.4.2.
Removal of the Direct Frame
8.4.3.
Removal of the 2nd Lens Frame
Move Unit
28
8.5.
Assembly Procedure for the
Lens
8.5.1.
Phase alignment of the Direct
Frame and Drive Frame Unit
8.5.2.
Phase alignment of the Drive/Direct
Unit and Fixed Frame
Page of 52
Display

Click on the first or last page to see other DMC-FX30P / DMC-FX30PC / DMC-FX30PL / DMC-FX30EB / DMC-FX30EE / DMC-FX30EF / DMC-FX30EG / DMC-FX30EGM / DMC-FX30GC / DMC-FX30GD / DMC-FX30GK / DMC-FX30GN / DMC-FX30GT / DMC-FX30SG service manuals if exist.