Panasonic DMC-FS35EB / DMC-FS35EE / DMC-FS35EF / DMC-FS35EG / DMC-FS35EP / DMC-FH25P / DMC-FH25PC / DMC-FH25PR / DMC-FH25PU / DMC-FH25GA / DMC-FH25GC / DMC-FH25GF / DMC-FH25GH / DMC-FH25GK / DMC-FH25GN / DMC-FH25GT / DMC-FH24P Service Manual ▷ View online
45
9.4.
After Adjustment
9.4.1.
Initial Setting
Since the initial setting has been released to execute the built-in adjustment software, it should be set up again before shipping the
camera to the customer.
Refer to the procedure described in “3.4.2. INITIAL SETTINGS” for details.
camera to the customer.
Refer to the procedure described in “3.4.2. INITIAL SETTINGS” for details.
[ IMPORTANT ]
1. The initial setting should be done again after completing the alignment. Otherwise, the camera will not work properly.
Therefore as a warning, the camera display a warning symbol “ ! ” on the LCD monitor every time the camera is turned off.
2. Confirm that status of all adjustment flag show “F”. Even if one of the adjustment flag shows “0”, initial setting programmed is
never executed.
3. Adjustment software “DIAS” is able to control the status of the adjustment flags.
The Adjustment software “DIAS” is available at “TSN Website”, therefore, access to “TSN Website” at “Support Information
from NWBG/VDBG-AVC”.
from NWBG/VDBG-AVC”.
46
10 Maintenance
10.1. Cleaning Lens and LCD Panel
Do not touch the surface of lens and LCD Panel with your hand.
When cleaning the lens, use air-Blower to blow off the dust.
When cleaning the LCD Panel, dampen the lens cleaning paper with lens cleaner, and the gently wipe the its surface.
Note:
When cleaning the lens, use air-Blower to blow off the dust.
When cleaning the LCD Panel, dampen the lens cleaning paper with lens cleaner, and the gently wipe the its surface.
Note:
The Lens Cleaning KIT ; VFK1900BK (Only supplied as 10 set/Box) is available as Service Aid.
S-1
S1. About Indication of The Schematic Diagram ............................ S-1
S1.1. Important Safety Notice......................................................... S-1
S2. Voltage Chart ........................................................................... S-2
S2.1. Flash Top P.C.B. .................................................................... S-2
S3. Block Diagram .......................................................................... S-3
S3.1. Overall Block Diagram .......................................................... S-3
S4. Schematic Diagram .................................................................. S-4
S4.1. Interconnection Diagram ....................................................... S-4
S4.2. Flash Top Schematic Diagram .............................................. S-5
S4.3. CCD Flex Schematic Diagram .............................................. S-6
S4.4. Lens Flex Schematic Diagram .............................................. S-7
S5. Print Circuit Board .................................................................... S-8
S5.1. Flash Top P.C.B. .................................................................... S-8
S5.2. CCD Flex P.C.B. .................................................................. S-12
S5.3. Lens Flex P.C.B. .................................................................. S-13
S6. Replacement Parts List .......................................................... S-15
S7. Exploded View ....................................................................... S-20
S7.1. Frame and Casing Section.................................................. S-20
S7.2. Packing Parts and Accessories Section (1) ........................ S-21
S7.3. Packing Parts and Accessories Section (2) ........................ S-22
Table of contents
Service Manual
Diagrams and Replacement
Parts List
Model No.
Digital Camera
DSC1102004CE
DMC-FS35EB
DMC-FS35EE
DMC-FS35EF
DMC-FS35EG
DMC-FS35EP
DMC-FH25P
DMC-FH25PC
DMC-FH25PR
DMC-FH25PU
DMC-FH25GA
DMC-FH25GC
DMC-FH25GF
DMC-FH25GH
DMC-FH25GK
DMC-FH25GN
DMC-FH25GT
DMC-FH24P
Vol. 1
[DMC-FS35]
Colour
(S)...........Silver Type (except EF)
(K)...........Black Type
(R)...........Red Type (except EE)
(A)...........Blue Type (except EF)
(V)...........Violet Type (except EE/EF)
(K)...........Black Type
(R)...........Red Type (except EE)
(A)...........Blue Type (except EF)
(V)...........Violet Type (except EE/EF)
[DMC-FH25]
(S)...........Silver Type (except PC/PR/GT)
[DMC-FH24]
(K)...........Black Type
(K)...........Black Type
(A)...........Blue Type (only P/PC/PU/GK/GN)
(V)...........Violet Type (only P/PC/PR/PU/GT)
(V)...........Violet Type (only P/PC/PR/PU/GT)
(R)...........Red Type (except PR/GT)
Name of Signal
OFTR
FEP
This signal is connected
to the FEP schematic diagram.
Circuit name being connected.
6.Use the parts number indicated on the Replacement Parts List .
7.Indication on Schematic diagrams:
7.Indication on Schematic diagrams:
5.The voltage being indicated here may be include observational-error (deviation) due to
internal-resistance and/or reactance of equipment. Therefore, handle the value
indicated on here as reference.
4.Although the voltage and waveform available on here is measured with standard frame,
it may be differ from actual measurement due to modification of circuit and so on.
3.The voltage being indicated on the schematic diagram is measured in
"Standard-Playback" mode when there is no specify mode is mentioned.
2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.
when the TP (Test Point) indicated as " " mark.
1.Although reference number of the parts is indicated on the P.C.B. drawing and/or
schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.
FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.
COMPONENTS IDENTIFIED WITH THE MARK
HAVE THE SPECIAL CHARACTERISTICS
S1. About Indication of The Schematic Diagram
S1.1. Important Safety Notice
S-2
S2. Voltage Chart
S2.1. Flash Top P.C.B.
Note) Indicated voltage values are the standard values for the unit measured by the DC electronic circuit tester (high-impedance) with the chassis taken as standard.
Therefore, there may exist some errors in the voltage values, depending on the internal impedance of the DC circuit tester.
REF No.
PIN No. POWER ON
IC8100
1
0
IC8100
2
0
IC8100
3
0
IC8100
4
0
IC8100
5
3.4
IC8100
6
0
IC8100
7
0
IC8100
8
0
IC8100
9
3.1
IC8100
10
3.9
Click on the first or last page to see other DMC-FS35EB / DMC-FS35EE / DMC-FS35EF / DMC-FS35EG / DMC-FS35EP / DMC-FH25P / DMC-FH25PC / DMC-FH25PR / DMC-FH25PU / DMC-FH25GA / DMC-FH25GC / DMC-FH25GF / DMC-FH25GH / DMC-FH25GK / DMC-FH25GN / DMC-FH25GT / DMC-FH24P service manuals if exist.