DOWNLOAD Panasonic BL-C210CE / BL-C210E Service Manual ↓ Size: 3.27 MB | Pages: 69 in PDF or view online for FREE

ORDER NO. KMS0912744CE

(for Europe, Asia, Oceania, Middle Near East, Russia,
Africa and Latin America) 

2

PAGE

PAGE

1 Warning --------------------------------------------------------------3

1.1. Battery Caution ---------------------------------------------3
1.2. Information for Users on Collection and

Disposal Old Equipment and used Batteries--------3

1.3. About Lead Free Solder (PbF: Pb free) --------------4
1.4. For Service Technicians ----------------------------------6
1.5. Trademarks --------------------------------------------------7

2 Specifications ------------------------------------------------------8

2.1. Internal Memory Capacity for Buffered Images-----9

3 Features ------------------------------------------------------------ 10
4 Technical Descriptions---------------------------------------- 11

4.1. Main Board------------------------------------------------- 11
4.2. Power Transfer Unit ------------------------------------- 18

5 Location of Controls and Components------------------ 19

5.1. Understanding the Camera Indicators -------------- 19

6 Installation Instructions--------------------------------------- 20
7 Operation Instructions ---------------------------------------- 22

7.1. Preparation ------------------------------------------------ 22
7.2. Connection------------------------------------------------- 23
7.3. Setup Guide ----------------------------------------------- 24

8 Troubleshooting Guide---------------------------------------- 26

8.1. Starting Up Operation ----------------------------------- 26
8.2. Indicator view Check  ----------------------------------- 27
8.3. LAN Block Check----------------------------------------- 28
8.4. LENS Block Check--------------------------------------- 31
8.5. Power Supply Block Check---------------------------- 32
8.6. Other Operation Check --------------------------------- 33
8.7. Pyroelectric Infrared Sensor Check ----------------- 34
8.8. Sound Block Check-------------------------------------- 35
8.9. The Inspection After The Repair --------------------- 35

8.10. Diagnosis NG Check ------------------------------------ 36

8.11. In Case Where the Main Board Is Replaced

and a New MAC Address Label Is Used ----------- 36

8.12. Update Firmware ----------------------------------------- 36
8.13. How To Change MAC Address Label --------------- 37
8.14. How to Replace a Flat Package IC ------------------ 38

9 Disassembly and Assembly Instructions--------------- 39

9.1. Disassembly Instructions------------------------------- 39

10 Maintenance ------------------------------------------------------ 44

10.1. Cleaning the Camera------------------------------------ 44

11 Factory Setting--------------------------------------------------- 45

11.1. Resetting the Camera----------------------------------- 45
11.2. Resetting the Camera Using the FACTORY

DEFAULT RESET Button ------------------------------ 45

12 Block Diagram --------------------------------------------------- 46
13 Schematic Diagram--------------------------------------------- 47

13.1. For The Schematic Diagram -------------------------- 47
13.2. Schematic Diagram-------------------------------------- 48
13.3. Waveform -------------------------------------------------- 55

14 Printed Circuit Board ------------------------------------------ 58

14.1. Main Board (Component View) ----------------------- 58
14.2. Main Board (Bottom View) ----------------------------- 58
14.3. Lens Board (Component View) ----------------------- 59
14.4. Lens Board (Bottom View) ----------------------------- 59
14.5. I/O Board (Component View) ------------------------- 60
14.6. I/O Board (Bottom View) ------------------------------- 60
14.7. Sensor Board (Component View) -------------------- 61
14.8. Sensor Board (Bottom View) -------------------------- 61

15 Appendix Information of Schematic Diagram -------- 62

15.1. Terminal Guide of ICS, Transistors and

Diodes ------------------------------------------------------ 62

16 Exploded View and Replacement Parts List----------- 63

16.1. Cabinet and Electrical Parts Location -------------- 63
16.2. Accessories and Packing Materials----------------- 64
16.3. Replacement Parts List -------------------------------- 65

3

Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the manufacturer’s Instructions.
 
The lithium battery is a critical component (type No. CR2032 (BT901)). Please observe for the proper polarity and the
exact location when replacing it and soldering the replacement lithium battery in. 

4

In the information below, Pb, the symbol for lead in the periodic table of elements, will refer to standard solder or solder that con-
tains lead.

We will use PbF solder when discussing the lead free solder used in our manufacturing process which is made from Tin, (Sn),
Silver, (Ag), and Copper, (Cu).

This model, and others like it, manufactured using lead free solder will have PbF stamped on the PCB. For service and repair
work we suggest using the same type of solder.

• PbF solder has a melting point that is 50

° F ~ 70° F (30° C ~ 40° C) higher than Pb solder. Please use a soldering iron with tem-

perature control and adjust it to 700

° F ± 20° F (370° C ± 10°C).

• Exercise care while using higher temperature soldering irons.:

Do not heat the PCB for too long time in order to prevent solder splash or damage to the PCB.

• PbF solder will tend to splash if it is heated much higher than its melting point, approximately 1100

°F, (600°C).

• When applying PbF solder to double layered boards, please check the component side for excess which may flow onto the

opposite side (See figure, below).