DOWNLOAD Panasonic BL-C10CE / BL-C10E Service Manual ↓ Size: 2.37 MB | Pages: 95 in PDF or view online for FREE

Model
BL-C10CE BL-C10E
Pages
95
Size
2.37 MB
Type
PDF
Document
Service Manual
Brand
Device
Video Monitoring / NETWORK CAMERA
File
bl-c10ce-bl-c10e.pdf
Date

Panasonic BL-C10CE / BL-C10E Service Manual ▷ View online

I/O BOARD
SUB BOARD
5
BL-C10CE / BL-C10E
LENS BOARD
2 FOR SERVICE TECHNICIANS
ICs and LSIs are vulnerable to static electricity.
When replacing, the following precautions will help to prevent recurring malfunctions.
 1. Cover the plastic parts with aluminum foil.
 2. Ground the soldering irons.
 3. Use a conductive mat on the work-table.
 4. Do not grasp IC or LSI pins with bare fingers.
6
BL-C10CE / BL-C10E
3 CAUTION
3.1. SAFETY PRECAUTIONS
 1. Before servicing, unplug the power cord to prevent an electrical shock.
 2. When replacing parts, use only manufacturer’s recommended components for safety.
 3. Check the condition of power cord. Replace if wear or damage is evident.
 4. After servicing, be sure to restore the lead dress, insulation barriers, insulation papers, shields, etc.
 5. Before returning the serviced equipment to the customer, make the following insulation resistance test to prevent a shock
hazard.
3.2. BATTERY CAUTION
Danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type recommended by the
manufacturer. Discard used batteries according to following caution:
Disposal or transportation of lithium batteries should be performed by permitted, in accordance with federal, state and local
guidelines.
A battery continues to have no transportation limitations as long as it is separated to prevent short circuits and packed in strong
packaging.
Commercial firms that dispose of any quantity of lithium cells should have a mechanism in place to account for their ultimate
disposition. This is a good practice for all types of commercial or industrial waste.
When the lithium battery is exchanged, the clock settings are cleared. In this case, make clock settings again.
Recommend Type Number:
CR-1632/1HF (BAT1) Manufactured by MATSUSHITA
7
BL-C10CE / BL-C10E
3.3. TRADEMARKS
     ·    Adobe and Acrobat are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States
and/or other countries.
     ·    Ethernet is either a registered trademark or a trademark of Xerox Corporation in the United States and/or other countries.
     ·    Microsoft, Windows, Hotmail and ActiveX are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
     ·    Pentium is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other
countries.
     ·    Screen shots reprinted with permission from Microsoft Corporation.
     ·    All other trademarks identified herein are the property of their respective owners.
3.4. INSULATION RESISTANCE TEST
 1. Unplug the AC power cord and short the two prongs of the plug with a jumper wire.
 2. Measure the resistance value with ohmmeter between the jumpered AC plug and each exposed metal cabinet part, such as
screw threads, etc.
Note:
Some exposed parts may be isolated from the chassis by design. These will read infinity.
 3. If the measurement is outside the specified limits, there is a possibility of shock hazard. The equipment should be repaired and
rechecked before it is returned to the customer.
8
BL-C10CE / BL-C10E
Page of 95
Display

Click on the first or last page to see other BL-C10CE / BL-C10E service manuals if exist.