DOWNLOAD Panasonic BB-HCA3CE / BB-HCA3E Service Manual ↓ Size: 220.53 KB | Pages: 4 in PDF or view online for FREE

Order No. KMS0704320CE

(for Europe, Asia, Oceania, Middle Near East, Russia, 

Africa and Latin America) 

2

PAGE

PAGE

1 Warning --------------------------------------------------------------2

1.1. Precautions for Users in The United Kingdom------2

2 Exploded View and Replacement Parts List -------------4

2.1. Accessories and Packing Materials------------------- 4
2.2. Replacement Parts List ---------------------------------- 4

This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 3 amp fuse is fitted in this
plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating of 3 amps and that it is
approved by ASTA or BSI to BS1362.

Check for the ASTA mark

 or the BSI mark 

 on the body of the fuse.

If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced. If you lose the fuse
cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your
local Panasonic Dealer.

IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD
BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13 AMP SOCKET.

If a new plug is to be fitted, please observe the wiring code as shown below. If in any doubt, please consult a qualified electri-
cian.

IMPORTANT: THIS APPLIANCE MUST BE EARTHED.

How to replace the fuse: The wires in this mains lead are coloured in accordance with the following code:
Blue: Neutral
Brown: Live

As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the ter-
minals in your plug, proceed as follows.

The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or coloured
BLACK.

The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with the letter L or coloured
RED.

Under no circumstances should either of these wires be connected to the earth terminal of the three pin plug, marked with the

letter E or the Earth symbol

.

3

1. Insert the flathead screwdriver into the groove either end of the fuse carrier.

2. Detach the fuse carrier and change the fuse.

3. Replace the fuse into the fuse carrier and resecure into the mains plug.

4

Note:

1. RTL (Retention Time Limited)

The marking (RTL) indicates that the Retention Time is
limited for this item.
After the discontinuation of this assembly in production,
the item will continue to be available for a specific period
of time. The retention period of availability depends on
the type of assembly and the laws governing parts and
product retention. At the end of this period, the assembly
will no longer be available.

2. Important safety notice

Components identified by the   mark indicates special
characteristics important for safety. When replacing any
of these components, only use specified manufacture's
parts.

3. The S mark means the part is one of some identical parts.

For that reason, it may be different from the installed part.

4. ISO code (Example : ABS-94HB) of the remarks column

shows quality of the material and a flame resisting grade
about plastics.