Panasonic CY-PAD1003W Service Manual ▷ View online
General
Power Supply
DC 12V (11V - 16V),
Test Voltage 14.4V
Negative Ground
Current Consumption
29A (at 350W×1)
Speaker Impedance
4
Ω
Power Output (“EIA” Power)
1-CH (Monaural)
350W×1 (10Hz-8000Hz, 1%, 4
Ω
)
Maximum Power Output
1-CH (Monaural)
600W×1 (10Hz-8000Hz, 10%)
Total Harmonic Distortion
0.2% (1000Hz, at 10W)
Low Pass Filter
50Hz-250Hz
Bass Boost
0dB-15dB (Middle Frequency: 45Hz)
Subsonic Filter
20Hz, -3dB, 12dB/oct
Signal to Noise Ratio
90dB (IHF, A)
Frequency Response
10Hz-8kHz
Input Sensitivity
0.2V-6V
Input Impedance
More than 22k
Ω
Dimensions (W×H×D)**
280×62×303 mm
Weight**
4.0 kg
* Specifications and the design are subject to possible modification
without notice due to improvements.
without notice due to improvements.
** Dimensions and Weight shown are approximate.
** Above specifications comply with EIA standards.
CY-PAD1003W
Digital Mono Amplifier
AUTOMOTIVE AFTERMARKET
Specifications*
ORDER NO. ACED060947C3
1
ABOUT LEAD FREE SOLDER (PbF)
2
2
FEATUERS
2
3
REPLACEING THE FUSE
2
4
DIMENSIONS
2
5
WIRING CONNECTION
3
1 ABOUT LEAD FREE
SOLDER (PbF)
Distinction of PbF PCB:
PCBs (manufactured) using lead free solder will have a PbF
stamp on the PCB.
stamp on the PCB.
Caution :
•
•
•
•
Pb free solder has a higher melting point than standard
solder; Typically the melting point is 50 - 70°F (30 -
40°C)
solder; Typically the melting point is 50 - 70°F (30 -
40°C)
higher.
Please
use
a
soldering
iron
with
temperature control and adjust it to 700 ± 20°F (370 ±
10°C). In case of using high temperature soldering iron,
please be careful not to heat too long.
10°C). In case of using high temperature soldering iron,
please be careful not to heat too long.
•
•
•
•
Pb free solder will tend to splash when heated too high
(about 1100°F/600°C)
(about 1100°F/600°C)
•
•
•
•
This lead free solder will be used for the products after
serial No. 1,000,001.
serial No. 1,000,001.
2 FEATUERS
•
•
•
•
1100 W × 1channel maximum power output
•
•
•
•
Low-Pass Filter for subwoofer
•
•
•
•
Hight Level Speaker Input connection
•
•
•
•
Bass boost control system
•
•
•
•
Crossover Frequency Control
•
•
•
•
RCA output terminals
•
•
•
•
5.1-channel Surround System (Combination with other
Panasonic car audio products)
Panasonic car audio products)
6
REPLACEMENT PARTS LIST
4
7
EXPLODED VIEW (Unit)
9
8
WIRING DIAGRAM
10
9
SCHEMATIC DIAGRAM
15
10 BLOCK DIAGRAM
19
3 REPLACEING THE FUSE
Use fuses of the same specified rating 25 amps. Using different
substitutes or fuses with higher ratings, or connecting the unit
directly without a fuse, could cause fire or damage to the stereo
unit.
substitutes or fuses with higher ratings, or connecting the unit
directly without a fuse, could cause fire or damage to the stereo
unit.
4 DIMENSIONS
CONTENTS
Page
Page
2
CY-PAD1003W
5 WIRING CONNECTION
3
CY-PAD1003W
6 REPLACEMENT PARTS
LIST
Notes :
1. Be sure to make your orders of replacement parts
according to this list.
2. Important safety notice: Components, identified by
mark
have special characteristics important for safety. When
replacing
replacing
any
of
these
components,
use
only
manufacturer´s specified parts.
3. Location keys in the remarks column indicates the general
location of the parts shown in the exploded drawing, as in a
road map.
road map.
4. The marking (RTL) indicates that Retention Time is limited
for this item. After the discontinuation of assembly in
production, the item will continue to be available for a
specific period of time. The retention period of availability is
dependent on the type of assembly, and in accordance with
the laws governing part and product retention. After the end
of this period, the assembly will no longer be available.
production, the item will continue to be available for a
specific period of time. The retention period of availability is
dependent on the type of assembly, and in accordance with
the laws governing part and product retention. After the end
of this period, the assembly will no longer be available.
•
•
•
•
Order intake period is basically six months after the first
shipment.
shipment.
5. “T” marks in remarks colum are indicated supply parts of
PTW.
Ref. No.
Part No.
Part Name & Description
Remarks
[11-06A15-32-G] Main Block
IC´s AND TRANSISTORs
QP16
07-07815-00
IC
T
QP17
07-07915-00
IC
T
U1
07-00072-01
IC
T
U2
07-00072-01
IC
T
U3
07-00072-01
IC
T
U4
07-00072-01
IC
T
UP1
07-00494-00
IC
T
Q2
08-05401-00
Transistor
T
Q5
08-00034-00
Transistor
T
Q6
08-00034-00
Transistor
T
Q11
08-03421-00
Transistor
T
Q12
08-05551-85
Transistor
T
Q13
09-00114-01
Transistor
T
Q13A
09-00114-00
Transistor
T
Q14
08-05401-85
Transistor
T
Q15
08-05401-85
Transistor
T
Q16
08-03904-85
Transistor
T
Q19
08-03421-00
Transistor
T
QF1
08-10667-01
Transistor
T
QP1
08-05551-00
Transistor
T
QP2
08-05401-00
Transistor
T
QP3
08-05551-00
Transistor
T
QP4
08-05401-00
Transistor
T
QP5
08-05401-00
Transistor
T
QP6
08-50N06-00
Transistor
T
QP7
08-50N06-00
Transistor
T
QP8
08-50N06-00
Transistor
T
QP9
08-50N06-00
Transistor
T
QP10
08-50N06-00
Transistor
T
QP11
08-50N06-00
Transistor
T
QP12
08-01358-00
Transistor
T
QP13
08-05551-00
Transistor
T
QP14
08-05551-00
Transistor
T
QP15
08-05551-00
Transistor
T
U99
08-05551-00
Transistor
T
DIODEs
D5
09-14148-85
Diode
T
D15
09-20130-01
Zener Diode
T
Ref. No.
Part No.
Part Name & Description
Remarks
D17
09-14148-85
Diode
T
D18
09-20056-03
Zener Diode
T
D22
09-00240-86
Zener Diode
T
D23
09-14148-85
Diode
T
DA1
09-14148-85
Diode
T
DA2
09-14148-85
Diode
T
DA10
09-14148-01
Diode
T
DA20
09-14148-85
Diode
T
DP1
09-14148-01
Diode
T
DP4
09-14148-01
Diode
T
DP5
09-14004-00
Diode
T
DP6
09-14148-01
Diode
T
DP7
09-14148-01
Diode
T
DP8
09-14148-01
Diode
T
DP9
09-14148-01
Diode
T
DP10
09-14148-01
Diode
T
DP11
09-20A20-00
Diode
T
DP12
09-20C20-00
Diode
T
DP13
09-00154-00
Diode
T
DP14
09-00154-00
Diode
T
DP15
09-00154-00
Diode
T
DP16
09-00154-00
Diode
T
DP17
09-15401-01
Diode
T
DP20
09-14148-01
Diode
T
DP21
09-14148-01
Diode
T
Z4
09-20056-85
Zener Diode
T
ZA1
09-20120-03
Zener Diode
T
ZA2
09-20120-03
Zener Diode
T
ZD2
09-20390-03
Zener Diode
T
ZD3
09-20390-03
Zener Diode
T
ZD4
09-00047-00
Zener Diode
T
ZF1
09-00075-00
Zener Diode
T
LED
19-00329-00
LED
T
PHOTOCOUPLERs
P1
07-00817-02
Photocoupler
T
P2
07-00817-02
Photocoupler
T
CAPACITORs
C1
04-21000-05
100PF 50WV
T
C2
02-21001-46
10µF 50WV
T
C3
04-21000-05
100PF 50WV
T
C4
02-21001-46
10µF 50WV
T
C5
02-21001-46
10µF 50WV
T
C6
02-21001-46
10µF 50WV
T
C7
02-21001-46
10µF 50WV
T
C8
02-21001-46
10µF 50WV
T
C9
04-21000-05
100PF 50WV
T
C10
04-21000-05
100PF 50WV
T
C11
02-21001-46
10µF 50WV
T
C12
03-21030-60
0.01µF 63WV
T
C13
03-21030-60
0.01µF 63WV
T
C14
03-26830-06
0.068µF 63WV
T
C14A
03-21030-60
0.01µF 63WV
T
C15
03-26830-06
0.068µF 63WV
T
C15A
03-21040-07
0.1µF 63WV
T
C17
04-21500-05
150PF 100WV
T
C18
03-24740-03
0.47µF 63WV
T
C19
03-21040-07
0.1µF 63WV
T
C20
03-24730-06
0.047µF 63WV
T
C21
03-21040-07
0.1µF 63WV
T
C25
03-21040-85
0.1µF 50WV
T
C31
03-22240-05
0.22µF 100WV
T
C32
03-22240-05
0.22µF 100WV
T
C33
03-22240-05
0.22µF 100WV
T
C38
02-24702-61
470µF 80WV
T
C39
02-24702-61
470µF 80WV
T
C51
06-00474-02
0.47µF 400WV
T
C51A
02-22201-45
22µF 50WV
T
C51B
06-00684-01
0.68µF 250WV
T
C51C
03-21030-60
0.01µF 63WV
T
C55
02-21002-85
100µF 16WV
T
4
CY-PAD1003W