DOWNLOAD Panasonic SL-DZ1200PP / SL-DZ1200EB / SL-DZ1200EG / SL-DZ1200EP / SL-DZ1200GN Service Manual ↓ Size: 7.24 MB | Pages: 98 in PDF or view online for FREE

The laser diode in the optical pick-up may break down due to
potential difference caused by static electricity of clothes or
human body.

So be careful of electrostatic breakdown during repair of the
optical pick-up.

 1. Do not subject the optical pick-up to static electricity as it is

extremely sensitive to electrical shock.

 2. To protect the laser diode against electrostatic breakdown,

short the flexible board (FFC board) with a clip or similar
object. Refer to Fig. 2-1.

 3. Take care not to apply excessive stress to the flexible board

(FFC board).

 4. Do not turn the variable resistor (laser power adjustment). It

has already been adjusted. Refer to Fig. 2-1.

Fig. 2-1.

Use the anti-static wrist strap to discharge the static electricity
from your body. Refer to Fig. 2-2.

Fig. 2-2.

Put a conductive material (sheet) or steel sheet on the area
where the optical pick-up is placed, and ground the sheet.
Refer to Fig. 2-3.

Fig. 2-3.

The static electricity of your clothes will not be grounded
through the wrist strap.

So take care not to let your clothes touch the optical pick-
up.

5

6

    

    

AC power supply cord for (PP) area
(REZ1619)....................1 pc.

    

    

AC mains lead for (EB) area
(REZ1496)....................1 pc.

    

    

AC mains lead for (EG),(EP) areas
(REZ1495)....................1 pc.

    

    

AC mains lead for (GN) areas
(REZ1620)....................1 pc.

    

    

Stereo connection cable for all areas
(SFDHBD2N01)....................1 pc.

    

    

Slip surface for all areas
(RGK1704-S2)....................1 pc.

7

This direct drive digital turntable is designed for DJs to play digital media (CDs and SD audio) giving an analog-like feeling. Having the feeling of an
analog turntable, this unit delivers digitally robust functions and performance realizing a new style of play.

You can store up to 4 audio segments to memory.

You can use for dual play for up to 2 sample pads,

and use for switching between one shot and loop
play.

You can store 4 cue points to
memory. Play can be started in-
stantly from one of those cue
points.

You can set the IN and OUT
points and play as a loop.

You can use the red strobo illu-
minator to check changes in
tempo.

Setting the cue point

S t o r e   t h e   c u e   p o i n t   t o
memory.

Back cue

During play you can instantly
return to the set cue point
and the unit waits in the
pause state.

You can SAVE and LOAD sample
pad, cue point panel data etc. to
the SD Memory Card.

You can simulate sound simi-
lar to an analog player.

You can transform sound by
using the platter.

The rotation direction of the
platter can be reversed by
switching the play direction
switch to REVERSE or FOR-
WARD.

Play media is synchronized
with platter movement.

You can control the play speed

(tempo).

You can adjust the tempo to

4 levels of settings between

±

8   a n d  

±

5 0   u s i n g   t h e

RANGE button.

You can instantly return to
normal playing speed using
the RESET button.

By using the PITCH LOCK
button the pitch is held even
if the tempo is changed.

Selects CD or SD play.

You can switch the platter to
freewheel.

Use your hand to turn the plat-
ter slip surface for scratch,
brake and spin DJ play.

CD slot (Slot in type)

Mode for DJ play.

Mode for use as an audio
player.

8