Panasonic SC-HTB10EB / SC-HTB10EE / SC-HTB10EG / SC-HTB10GN / SC-HTB10GS / SC-HTB10P / SC-HTB10PC Service Manual / Supplement ▷ View online
13
Step 3 : Cut off the Cable Tie.
Caution : During assembling, ensure the head of cable tie must be facing inward and tail of cable tie must be properly cut
with remaining 1mm away from the head.
Step 4 : Remove 1 screw.
Caution : During assembling, ensure the head of cable tie must be facing inward and tail of cable tie must be properly cut
with remaining 1mm away from the head.
Step 4 : Remove 1 screw.
Step 5 : Slightly lift up the AC Inlet P.C.B. as arrow shown.
Caution : During assembling, ensure the AC Inlet P.C.B. is properly seated onto the locators.
Caution : During assembling, ensure the AC Inlet P.C.B. is properly seated onto the locators.
14
Step 6 : Desolder the wires, black (TL20) and red (TL10).
Step 7 : Desolder the wires, blue (TL31) and white (TL30).
Step 8 : Remove the AC Inlet P.C.B. as arrow shown.
Caution : During assembling, ensure the cable wire is properly seated onto the hook.
Step 7 : Desolder the wires, blue (TL31) and white (TL30).
Step 8 : Remove the AC Inlet P.C.B. as arrow shown.
Caution : During assembling, ensure the cable wire is properly seated onto the hook.
15
3.4.
Disassembly of Main P.C.B. (For SC-HTB10EB/EG/EE/GN)
• Refer to “Disassembly of Back Cabinet Assembly”.
• Refer to “Disassembly of Main Chassis Assembly”.
• Refer to (Step 1) to (Step 2) of “Disassembly of AC Inlet P.C.B.”.
• Refer to “Disassembly of Main Chassis Assembly”.
• Refer to (Step 1) to (Step 2) of “Disassembly of AC Inlet P.C.B.”.
Step 1 : Remove the PC Sheet Assembly as arrow shown.
Step 2 : Remove 2 screws.
16
Step 3 : Detach the 50P FFC of the connector (CN200) on Main P.C.B..
Step 4 : Detact the 2P Wire of connector (CN2001) on Main P.C.B..
Step 5 : Slightly push forward the Main P.C.B. to avoid touching the Main Chassis Unit and lift it up as arrow shown.
Step 4 : Detact the 2P Wire of connector (CN2001) on Main P.C.B..
Step 5 : Slightly push forward the Main P.C.B. to avoid touching the Main Chassis Unit and lift it up as arrow shown.
Step 6 : Flip the Main P.C.B. to top of the Main Chassis Assembly.
Click on the first or last page to see other SC-HTB10EB / SC-HTB10EE / SC-HTB10EG / SC-HTB10GN / SC-HTB10GS / SC-HTB10P / SC-HTB10PC service manuals if exist.