Panasonic SC-HC35EG / SC-HC35EF / SC-HC35EP Service Manual ▷ View online
77
Step 10 : Place the Support Block to support the Front Cabinet
Block as shown.
Step 11 : Connect 5P Wire at the connector (CN1002) on
iPhone P.C.B..
Step 12 : Connect 15P extension cable (RFKZHC55K2) from
CN300 on the Remote Sensor P.C.B. to CN303 on the Main
P.C.B..
Block as shown.
Step 11 : Connect 5P Wire at the connector (CN1002) on
iPhone P.C.B..
Step 12 : Connect 15P extension cable (RFKZHC55K2) from
CN300 on the Remote Sensor P.C.B. to CN303 on the Main
P.C.B..
Step 13 : Check and repair Panel P.C.B. according to the dia-
gram shown.
gram shown.
9.2.
Checking & Repairing of CD
Servo P.C.B.
Servo P.C.B.
Note : Insert CD before Checking CD Servo P.C.B.
Step 1 : Remove Stand Assembly.
Step 2 : Remove Door Assembly.
Step 3 : Remove Net Frame Assembly.
Step 4 : Remove Front Panel Block.
Step 5 : Remove Panel P.C.B..
Step 6 : Remove CD Mechanism.
Step 7 : Place the Panel P.C.B. on the Support Block.
Step 8 : Connect 9P FFC at the connector (CN6801) on Panel
P.C.B..
Step 2 : Remove Door Assembly.
Step 3 : Remove Net Frame Assembly.
Step 4 : Remove Front Panel Block.
Step 5 : Remove Panel P.C.B..
Step 6 : Remove CD Mechanism.
Step 7 : Place the Panel P.C.B. on the Support Block.
Step 8 : Connect 9P FFC at the connector (CN6801) on Panel
P.C.B..
78
Step 9 : Use a tape to keep the centre switch (S643)
depressed.
depressed.
Step 10 : Place the Support Block to support the Front Cabinet
Block as shown.
Step 11 : Connect 5P Wire at the connector (CN1002) on
iPhone P.C.B..
Step 12 : Connect 15P extension cable (RFKZHC55K2) from
CN300 on the Remote Sensor P.C.B. to CN303 on the Main
P.C.B..
Block as shown.
Step 11 : Connect 5P Wire at the connector (CN1002) on
iPhone P.C.B..
Step 12 : Connect 15P extension cable (RFKZHC55K2) from
CN300 on the Remote Sensor P.C.B. to CN303 on the Main
P.C.B..
Step 13 : Place the CD Mechanism on the Support Block.
Step 14 : Place the Extension P.C.B. on the Insulating Material.
Step 15 : Connect 5P cable from Main P.C.B. to Extension
P.C.B..
Step 16 : Connect 5P cable from Extension P.C.B. to CD Servo
P.C.B..
Step 14 : Place the Extension P.C.B. on the Insulating Material.
Step 15 : Connect 5P cable from Main P.C.B. to Extension
P.C.B..
Step 16 : Connect 5P cable from Extension P.C.B. to CD Servo
P.C.B..
Step 17 : Connect 27P extension cable (RFKZHC55K1) from
CN7002 on the Main P.C.B. to CN7002 on the CD Servo
P.C.B..
CN7002 on the Main P.C.B. to CN7002 on the CD Servo
P.C.B..
79
Step 18 : Place the CD Mechanism on the Support Block.
9.3.
Checking & Repairing of Main
(Side B) P.C.B.
(Side B) P.C.B.
Step 1 : Remove Stand Assembly.
Step 2 : Remove Door Assembly.
Step 3 : Remove Net Frame Assembly.
Step 4 : Remove Front Panel Block.
Step 5 : Remove Panel P.C.B..
Step 6 : Remove CD Mechanism.
Step 7 : Remove 2 screws.
Step 8 : Remove Inner Bracket.
Step 2 : Remove Door Assembly.
Step 3 : Remove Net Frame Assembly.
Step 4 : Remove Front Panel Block.
Step 5 : Remove Panel P.C.B..
Step 6 : Remove CD Mechanism.
Step 7 : Remove 2 screws.
Step 8 : Remove Inner Bracket.
Step 9 : Remove 3 screws.
Step 10 : Lift up SMPS Unit.
Step 10 : Lift up SMPS Unit.
80
Step 11 : Detach 6P wire at the connector (CN905) on the
SMPS P.C.B..
Step 12 : Remove SMPS Unit.
SMPS P.C.B..
Step 12 : Remove SMPS Unit.
Step 13 : Lift up Himelons at the shaded area.
Caution : Replace the Himelons if they are torn during dis-
assembling.
Step 14 : Remove Rivet.
Caution : Replace the Himelons if they are torn during dis-
assembling.
Step 14 : Remove Rivet.
Step 15 : Release 1 Catch.
Step 16 : Lift up Main P.C.B..
Step 16 : Lift up Main P.C.B..
Step 17 : Flip over Main P.C.B..
Click on the first or last page to see other SC-HC35EG / SC-HC35EF / SC-HC35EP service manuals if exist.