Panasonic SB-PT165E / SB-HF165E / SB-HC150E / SB-HS151E / SB-W340E / SB-HC150P / SB-HS151P / SB-HW150P Service Manual ▷ View online
1 Assembling and Disassembling
“ATTENTION SERVICER”
Some chassis components may have sharp edges. Be careful when disassembling and servicing.
1. This section describes procedures for checking the operation and replacing the main components.
2. For reassembly after operation checks or replacement, reverse the respective procedures.
Special reassembly procedures are described only when required.
3. Select items from the following index when checks or replacement are required.
4. Refer to the Parts No. on the page of “Parts Location and Replacement Parts List” (Section 4), if necessary.
Below is the list of disassembly sections
• For SB-HF165E (Front speakers)
Disassembly of Upper box assembly
Disassembly of Upper rear cabinet assembly
Disassembly of Woofer (SP1)
Disassembly of Terminal
Disassembly of Lower box assembly
Disassembly of Lower rear cabinet assembly
Disassembly of Stand base assembly
• For SB-HC150P/E (Center speaker)
Disassembly of Front panel
Disassembly of Woofer (SP1)
• For SB-HS151P/E (Surround speakers)
Disassembly of Front panel
Disassembly of Woofer (SP1)
• For SB-HW150P / W340E (Woofer speaker)
Disassembly of Front cabinet assembly
Disassembly of Woofer (SP1)
3
SB-PT165E / SB-HF165E / SB-HC150E / SB-HS151E / SB-W340E / SB-HC150P / SB-HS151P / SB-HW150P
1.1. For SB-HF165E (Front
speakers)
1.1.1. Disassembly of Upper box
assembly
Step 1: Detach the white (+) and blue (-) speaker wires.
Step 2: Pull out the speaker cable from the groove of upper
box assembly.
box assembly.
Step 3: Remove 1 screw.
Step 4: Detach the upper box assembly.
4
SB-PT165E / SB-HF165E / SB-HC150E / SB-HS151E / SB-W340E / SB-HC150P / SB-HS151P / SB-HW150P
1.1.2. Disassembly of Upper rear cabinet
assembly
Follow (Step 1) to (Step 4) in item 1.1.1.
Step 1: Remove 10 screws.
Step 2: Hold down the upper front panel and lift up the upper
rear cabinet assembly.
rear cabinet assembly.
Step 3: Flip the upper rear cabinet assembly sideway.
Step 4: Detach the grey (-) and red (+) speaker wires.
Caution: Ensure the speaker wires are connected to the
correct terminals during assembling.
correct terminals during assembling.
Step 5: Remove upper rear cabinet assembly.
5
SB-PT165E / SB-HF165E / SB-HC150E / SB-HS151E / SB-W340E / SB-HC150P / SB-HS151P / SB-HW150P
1.1.3. Disassembly of Woofer (SP1)
Follow (Step 1) to (Step 4) in item 1.1.1.
Follow (Step 1) to (Step 3) in item 1.1.2.
Step 1: Detach the grey (-) and red (+) speaker wires.
Step 2: Remove 4 screws.
Step 3: Remove woofer (SP1).
1.1.4. Disassembly of Terminal
Follow (Step 1) to (Step 4) in item 1.1.1.
Follow (Step 1) to (Step 5) in item 1.1.2.
Step 1: Remove 1 screw from the upper rear cabinet assembly.
Step 2: Remove terminal.
6
SB-PT165E / SB-HF165E / SB-HC150E / SB-HS151E / SB-W340E / SB-HC150P / SB-HS151P / SB-HW150P