Panasonic SB-PS960GC / SB-PT960GC Service Manual ▷ View online
Type
2 way, 3 speaker system (Bass reflex)
Speaker unit(s)
Impedance 3
Ω
1. Full range
8 cm Cone type
2. Full range
8 cm Cone type
3. Super tweeter
Piezo type
Input power (IEC)
110 W* (Max)
Output sound pressure
82 dB/W (1.0 m)
Cross over frequency
10 kHz
Frequency range
100 Hz to 24 kHz (-16 dB)
110 Hz to 22 kHz (-10 dB)
SB-PS960GC
SB-PT960GC
Colour
(K)... Black Type
(K)... Black Type
Dimensions (W x H x D)
140 mm x 331 mm x 146.5 mm
Mass
1.6 kg
Notes :
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
analyzer.
* Rating with low-cut filter equipped amplifier.
Speaker System
Specification
ORDER NO. MD0707012CE
1 System Combination
1.1. System Breakdown
Note :
The tables below show the breakdown for speaker combinations used in main unit systems.
System SC-VK960GC-K
Music center
Music center
SA-VK960GC-K
Front speakers
SB-PF960GC-K
Surround speakers
SB-PS960GC-K
Center speaker
SB-PC960GC-K
Subwoofer
SB-WVK960GC-K
System SC-VK960EE-K
Music center
Music center
SA-VK960EE-K
Front speakers
SB-PF960GC-K
Surround speakers
SB-PS960GC-K
Center speaker
SB-PC960GC-K
Subwoofer
SB-WVK960GC-K
System SC-VK960GCSK
Music center
Music center
SA-VK960GCSK
Front speakers
SB-PF960GC-K
Surround speakers
SB-PS960GC-K
Center speaker
SB-PC960GC-K
Subwoofer
SB-WVK960GC-K
System SC-VK960GCTK
Music center
Music center
SA-VK960GCTK
Front speakers
SB-PF960GC-K
Surround speakers
SB-PS960GC-K
Center speaker
SB-PC960GC-K
Subwoofer
SB-WVK960GC-K
System SC-VK960GS-K
Music center
Music center
SA-VK960GS-K
Front speakers
SB-PF960GC-K
Surround speakers
SB-PS960GC-K
Center speaker
SB-PC960GC-K
Subwoofer
SB-WVK960GC-K
System SC-VK960GCPK
Music center
Music center
SA-VK960GCPK
Front speakers
SB-PF960GC-K
Surround speakers
SB-PS960GC-K
Center speaker
SB-PC960GC-K
Subwoofer
SB-WVK960GC-K
2
SB-PS960GC
2 Assembling and Disassembling
“ATTENTION SERVICER”
Some chassis components may have sharp edges. Be careful when disassembling and servicing.
1. This section describes procedures for checking the operation and replacing the main components.
2. For reassembly after operation checks or replacement, reverse the respective procedures.
Special reassembly procedures are described only when required.
3. Select items from the following index when checks or replacement are required.
4. Refer to the Parts No. on the page of “Parts Location and Replacement Parts List” (Section 5), if necessary.
Below is the list of disassembly sections
• Disassembly of Rear cabinet assembly
• Disassembly of Woofer 1 (SP1)
• Disassembly of Piezzo wire assembly
• Disassembly of Woofer 2 (SP1)
• Disassembly of Woofer 1 (SP1)
• Disassembly of Piezzo wire assembly
• Disassembly of Woofer 2 (SP1)
3
SB-PS960GC
Step 1: Remove 8 screws.
Step 2: Detach the front cabinet as arrow shown.
Step 3: Detach the yellow (+) and black (-) wires.
Step 4: Detach the red (+) and black (-) wires.
Step 5: Detach the gray (+) and blue (-) wires.
Step 6: Remove the rear cabinet assembly as arrow shown.
2.1. Disassembly of Rear cabinet assembly
4
SB-PS960GC
