Panasonic SB-PS860GC / SB-PT860GC Service Manual ▷ View online
2 Assembling and Disassembling
“ATTENTION SERVICER”
Some chassis components may have sharp edges. Be careful when disassembling and servicing.
1. This section describes procedures for checking the operation and replacing the main components.
2. For reassembly after operation checks or replacement, reverse the respective procedures.
Special reassembly procedures are described only when required.
3. Select items from the following index when checks or replacement are required.
4. Refer to the Parts No. on the page of “Parts Location and Replacement Parts List” (Section 5), if necessary.
Below is the list of disassembly sections
• Disassembly of Rear cabinet assembly
• Disassembly of Woofer 1 (SP1)
• Disassembly of Piezzo wire assembly
• Disassembly of Woofer 2 (SP1)
• Disassembly of Woofer 1 (SP1)
• Disassembly of Piezzo wire assembly
• Disassembly of Woofer 2 (SP1)
3
SB-PS860GC
Step 1: Remove 8 screws.
Step 2: Detach the front cabinet as arrow shown.
Step 3: Detach the yellow (+) and black (-) wires.
Step 4: Detach the red (+) and black (-) wires.
Step 5: Detach the gray (+) and blue (-) wires.
Step 6: Remove the rear cabinet assembly as arrow shown.
2.1. Disassembly of Rear cabinet assembly
4
SB-PS860GC
2.2. Disassembly of Woofer 1
(SP1)
Step 1: Remove rear cabinet assembly (Follow step 1 to step
3 in section 2.1).
3 in section 2.1).
Step 2: Remove 4 screws.
Step 3: Remove woofer 1 (SP1) as arrow shown.
2.3. Disassembly of Piezzo wire
assembly
Step 1: Remove rear cabinet assembly (Follow step 1 to step
2 and step 4 in section 2.1).
2 and step 4 in section 2.1).
Step 2: Remove the glue from piezzo wire assembly.
Step 3: Remove piezzo wire assembly as arrow shown.
5
SB-PS860GC
2.4. Disassembly of Woofer 2
(SP1)
Step 1: Remove rear cabinet assembly (Follow step 1 to step
2 and step 4 to step 5 in section 2.1).
2 and step 4 to step 5 in section 2.1).
Step 2: Remove 4 screws.
Step 3: Remove woofer 2 (SP1) as arrow shown.
6
SB-PS860GC
