Panasonic SB-PM45EG Service Manual ▷ View online
· Be sure to connect speaker cables before connecting the
AC power supply cord.
· The load impedance of any speaker used with this unit must
be 4
Ω.
· Be sure to connect the cable from the right speaker to the
right terminal and the cable from the left speaker to the left
terminal.
terminal.
1. Twist and pull off the vinyl tip of the speaker cords. If the
speaker cords do not have vinyl tips, connect them directly
to the terminals. Make sure the bare ends of the wires are
not unravelled.
to the terminals. Make sure the bare ends of the wires are
not unravelled.
2. Insert the wire to the rear panel of the unit and close the
lever.
Notes :
· To prevent damage to circuitry, never short-circuit positive
· To prevent damage to circuitry, never short-circuit positive
(+) and negative (-) speaker wires.
· Be sure to connect only positive (red) wires to positive (+)
terminals and negative (black) wires to negative (-)
terminals.
terminals.
Placement of speakers
3 Connection of the Speaker Cables
5
SB-PM45EG
4 Exploded view
4.1. Cabinet Parts Location
SB-PM45EG
6
4.2. Packaging
SB-PM45EG
7
5 Replacement Parts List
Notes :
· Important safety notice :
· Important safety notice :
When replacing any of these components, be sure to use
only manufacturer’s specified parts shown in the parts list.
only manufacturer’s specified parts shown in the parts list.
· [M] markings in the Remarks columns indicates parts
supplied by PAVCSG.
Ref.
No.
Part No.
Part Name & Description
Remarks
CABINET AND CHASSIS
1
RFKHBPM45PCL
SPEAKER CAB. ASS’Y L
[M]K
1
RFKHBPM45ESL
SPEAKER CAB. ASS’Y L
[M]S
1
RFKHBPM45PCR
SPEAKER CAB. ASS’Y R
[M]K
1
RFKHBPM45ESR
SPEAKER CAB. ASS’Y R
[M]S
2
RYBV0049-K
NET FRAME ASS’Y
[M]K
2
RYBV0049-S
NET FRAME ASSY.
[M]S
3
RMG0520-H
NET CATCHER
[M]
4
RKA0072-KJ
LEG CUSHION
[M]
5
RGNV0134
SPEC LABEL
[M]K
5
RGNV0342
SPEC LABEL
[M]S
PACKING MATERIALS
P1
RPNV0132
POLYFOAM
[M]
P2
RPFV0056
MIRAMAT
[M]
8
SB-PM45EG
FLE0703
Display