Panasonic SB-PF880GC / SB-PC880GC / SB-PS880GC Service Manual ▷ View online
4
3 Disassembly and Assembly Instructions
“ATTENTION SERVICER”
Some chassis components may have sharp edges. Be careful when disassembling and servicing.
This section describes procedures for checking the operation and replacing the main components.
For reassembly after operation checks or replacement, reverse the respective procedures.
Special reassembly procedures are described only when required.
Select items from the following index when checks or replacement are required.
Refer to the Parts No. on the page of “Exploded View and Replacement Parts List” (Section 5), if necessary.
Some chassis components may have sharp edges. Be careful when disassembling and servicing.
This section describes procedures for checking the operation and replacing the main components.
For reassembly after operation checks or replacement, reverse the respective procedures.
Special reassembly procedures are described only when required.
Select items from the following index when checks or replacement are required.
Refer to the Parts No. on the page of “Exploded View and Replacement Parts List” (Section 5), if necessary.
Below is the list of disassembly sections
Front Speakers (SB-PF880GC-K)
Disassembly of Front Panel Unit
Disassembly of Tweeter Speaker (SP1)
Disassembly of Woofer Speaker (SP2)
Disassembly of Tweeter Speaker (SP1)
Disassembly of Woofer Speaker (SP2)
Center Speaker (SB-PC880GCK1)
Disassembly of Front Panel Unit
Disassembly of Tweeter Speaker (SP3)
Disassembly of Woofer Speaker (SP4)
Disassembly of Tweeter Speaker (SP3)
Disassembly of Woofer Speaker (SP4)
Surround Speakers (SB-PS880GC-K)
Disassembly of Rear Cabinet Assembly
Disassembly of Full Range Speaker (SP5)
Disassembly of Full Range Speaker (SP5)
5
3.1.
Front Speakers (SB-PF880GC-K)
3.1.1.
Disassembly of Front Panel Assem-
bly
bly
Step 1: Remove 4 screws.
Step 2: Upset the Front Speaker.
Step 3: Insert flathead screwdriver into the grooves and apply
light force to push the Front Panel Assembly as arrow shown.
Step 4: Insert a steel rule in between the Speaker Cabinet and
Front Panel Assembly.
Step 3: Insert flathead screwdriver into the grooves and apply
light force to push the Front Panel Assembly as arrow shown.
Step 4: Insert a steel rule in between the Speaker Cabinet and
Front Panel Assembly.
Caution: Do not exert strong force as it may damage the
Front Panel Assembly.
Step 5: Detach the Front Panel Assembly as arrow shown.
Step 6: Detach the yellow (+) and black (-) speaker wires.
6
Step 7: Remove the Front Panel Assembly.
3.1.2.
Disassembly of Tweeter Speaker
(SP1)
(SP1)
Follow (Step 1) - (Step 7) in item 3.1.1
Step 1: Remove 4 screws.
Step 2: Remove the Tweeter Speaker (SP1).
Step 2: Remove the Tweeter Speaker (SP1).
7
3.1.3.
Disassembly of Woofer Speaker
(SP2)
(SP2)
Follow (Step 1) - (Step 7) in item 3.1.1
Step 1: Remove 4 screws.
Step 2: Detach the yellow/red (+) and black/black (-) speaker
wires.
Step 3: Remove the Woofer Speaker (SP2).
wires.
Step 3: Remove the Woofer Speaker (SP2).