Panasonic SB-PF760GC Service Manual ▷ View online
2 Assembling and Disassembling
“ATTENTION SERVICER”
Some chassis components may have sharp edges. Be careful when disassembling and servicing.
1. This section describes procedures for checking the operation and replacing the main components.
2. For reassembly after operation checks or replacement, reverse the respective procedures.
Special reassembly procedures are described only when required.
3. Select items from the following index when checks or replacement are required.
4. Refer to the Parts No. on the page of “Parts Location and Replacement Parts List” (Section 5), if necessary.
Below is the list of disassembly sections
• Disassembly of Front Panel
• Disassembly of Tweeter (SP1)
• Disassembly of Woofer (SP2)
• Disassembly of Tweeter (SP1)
• Disassembly of Woofer (SP2)
3
SB-PF760GC
2.1. Disassembly of Front panel
Step 1: Remove 4 screws.
Step 2: Insert flathead screwdriver into the grooves to push the
front panel as arrow shown.
front panel as arrow shown.
Step 3: Detach the front panel as arrow shown.
Step 4: Detach the black (+) and yellow (-) wires.
4
SB-PF760GC
Step 5: Remove the glue from ceramic buzzer.
Step 6: Remove ceramic buzzer as arrow shown.
Step 7: Detach the red (+) and black (-) wires.
Step 8: Remove front panel as arrow shown.
2.2. Disassembly of Tweeter (SP1)
Step 1: Remove front panel (Follow step 1 to step 4).
Step 2: Remove 4 screws.
Step 3: Remove tweeter (SP1) as arrow shown.
5
SB-PF760GC
2.3. Disassembly of Woofer (SP2)
Step 1: Remove front panel (Follow step 1 to step 3 and step
7).
7).
Step 2: Remove 4 screws.
Step 3: Remove woofer (SP2) as arrow shown.
6
SB-PF760GC