Panasonic SB-PF680GC Service Manual ▷ View online
6
Step 6: Detach the black (+) and yellow (-) wires.
Step 7: Detach the yellow/red (+) and black/black (-) wires.
Step 8: Remove the Speaker Cabinet Assembly.
Step 8: Remove the Speaker Cabinet Assembly.
3.1.1.2.
Assembly of Speaker Cabinet
Assembly
Assembly
Step 1: Scrape off and clean up the remaining glue at the 4
bosses and 4 holes and replace with new glue.
bosses and 4 holes and replace with new glue.
Step 2: Press the Front Panel Assembly together with the
Speaker Cabinet Assembly.
Caution: Ensure it is fixed tightly.
Speaker Cabinet Assembly.
Caution: Ensure it is fixed tightly.
7
3.1.2.
Disassembly of Tweeter Speaker
(SP1)
(SP1)
Follow (Step 1) to (Step 6) in item 3.1.1
Step 1: Remove 4 screws.
Step 2: Remove the Tweeter Speaker (SP1).
Step 2: Remove the Tweeter Speaker (SP1).
3.1.3.
Disassembly of Woofer Speaker
(SP2)
(SP2)
Follow (Step 1) to (Step 5) in item 3.1.1
Follow (Step 7) in item 3.1.1
Follow (Step 7) in item 3.1.1
Step 1: Remove 4 screws
Step 2: Remove the Woofer Speaker (SP2).
Step 2: Remove the Woofer Speaker (SP2).
8
3.1.4.
Replacement of Tweeter Ornament
3.1.4.1.
Disassembly of Tweeter Orna-
ment
ment
Follow (Step 1) to (Step 5) in item 3.1.1
Follow (Step 1) in item 3.1.2
Follow (Step 1) in item 3.1.2
Step 1: Remove the Tweeter Ornament.
3.1.4.2.
Assembly of Tweeter Ornament
Step 1: Fix the Tweeter Ornament.
Caution: Ensure the guides fix exactly to the holes.
Caution: Ensure the guides fix exactly to the holes.
Step 2: Support the Tweeter Ornament at the bottom.
Step 3: Fix 4 screws.
Step 3: Fix 4 screws.
9
3.2.
Replacement of Speaker Connector Housing
3.2.1.
Disassembly
Step 1: Use a paper clip push the Speaker Wire head until it
hide inside the Speaker Connector Housing.
Step 2: Pull out the (+) and (-) speaker wire.
hide inside the Speaker Connector Housing.
Step 2: Pull out the (+) and (-) speaker wire.
3.2.2.
Assembly
Cautions: Follow the following procedure during assem-
ble.
Step 1: Use a pen knife slightly push up the speaker wire head
approximately 45
approximately 45
°.
Step 2: Insert the (+) speaker wire into the (+) hole of the
Speaker Connector Housing.
Note: Push in the speaker wire until hear the “click” sound.
Speaker Connector Housing.
Note: Push in the speaker wire until hear the “click” sound.
Step 3: Insert the (-) speaker wire into the (-) hole of th speaker
connector housing.
Note: Push in the speaker wire until hear the “click” sound.
connector housing.
Note: Push in the speaker wire until hear the “click” sound.
Click on the first or last page to see other SB-PF680GC service manuals if exist.