Panasonic SB-PF460GC Service Manual ▷ View online
2 Assembling and Disassembling
“ATTENTION SERVICER”
Some chassis components may have sharp edges. Be careful when disassembling and servicing.
1. This section describes procedures for checking the operation and replacing the main components.
2. For reassembly after operation checks or replacement, reverse the respective procedures.
Special reassembly procedures are described only when required.
3. Select items from the following index when checks or replacement are required.
4. Refer to the Parts No. on the page of “Parts Location and Replacement Parts List” (Section 5), if necessary.
Below is the list of disassembly sections
•
Disassembly of Rear cabinet assembly
•
Disassembly of Tweeter (SP1)
•
Disassembly of Woofer (SP2)
2.1. Disassembly flow chart
The following chart is the procedure for disassembling the casing and inside parts for internal inspection when carrying out the
servicing.
servicing.
To assemble the unit, reverse the steps shown in the chart as below.
3
SB-PF460GC
2.2. Disassembly of Rear cabinet
assembly
Step 1: Remove 4 screws.
Step 2: Insert flathead screwdriver into the grooves to push the
front panel as arrow shown.
front panel as arrow shown.
Step 3: Detach the front panel as arrow shown.
Step 4: Detach the black (+) and yellow (-) wires.
4
SB-PF460GC
Step 5: Detach the black (+) and red (-) wires.
Step 6: Remove rear cabinet assembly as arrow shown.
2.3. Disassembly of Tweeter (SP1)
Follow (step 1) to (step 4) in item 2.2.
Step 1: Remove 4 screws.
Step 2: Remove tweeter (SP1) as arrow shown.
5
SB-PF460GC
2.4. Disassembly of Woofer (SP2)
Follow (step 1) to (step 3) in item 2.2.
Follow (step 5) in item 2.2.
Step 1: Remove 4 screws.
Step 2: Remove woofer (SP2) as arrow shown.
6
SB-PF460GC