Panasonic SB-MAX700PH / SB-MAX700GS Service Manual / Supplement ▷ View online
2
1 Notes
Background:
• For improvement of quality and performance.
This supplement includes additional and revised contents to the original service manual for below sections:-
1. Replacement of contents for Disassembly and Assembly Instructions following sections of the original service manual.
• Section 3.1. Disassembly of Upper Front Panel Assembly
• Section 3.5. Disassembly of Lower Front Panel Assembly
• Section 3.5. Disassembly of Lower Front Panel Assembly
2. Update to Exploded View.
3. Update to Mechanical Replacement Parts List.
3. Update to Mechanical Replacement Parts List.
3
2 Disassembly and Assembly Instructions
2.1.
Disassembly of Upper Front Panel Assembly.
Step 1 : Remove 2 screws.
Step 2 : Remove Corner Guard.
Step 3 : Remove 2 screws.
Step 4 : Remove Corner Guard.
Step 5 : Remove 2 screws.
Step 6 : Insert two flathead screwdriver at the sides of the boss
and apply light force to push out the Upper Front Panel Assem-
bly by sequence (1-6) shown.
Caution : Do not exert too much force as it may damage
the Upper Front Panel Assembly.
and apply light force to push out the Upper Front Panel Assem-
bly by sequence (1-6) shown.
Caution : Do not exert too much force as it may damage
the Upper Front Panel Assembly.
Step 7 : Detach the (+) and (-) speaker wires.
Step 8 : Remove the Upper Front Panel Assembly.
Step 8 : Remove the Upper Front Panel Assembly.
Caution 1 : Apply the Glue on the respective holes during
disassembling of Upper Front Panel Assembly.
disassembling of Upper Front Panel Assembly.
Caution 2 : Do not apply the Glue on the respective holes
during disassembling of Upper Front Panel Assembly.
during disassembling of Upper Front Panel Assembly.
4
2.2.
Disassembly of Lower Front Panel Assembly.
• Refer to “Disassembly of Upper Front Panel Assembly”.
Step 1 : Remove 2 screws.
Step 2 : Remove Corner Guard.
Step 3 : Remove 2 screws.
Step 4 : Remove Corner Guard.
Step 5 : Remove 2 screws.
Step 6 : Remove 2 screws.
Step 6 : Remove 2 screws.
Step 7 : Detach the Lower Front Panel Assembly slightly as
arrow shown.
Caution : Do not exert strong force as it may damage the
wiring within.
Step 8 : Lift up the Himelon.
Caution : Replace the Himelon if they are torn during dis-
assembling.
arrow shown.
Caution : Do not exert strong force as it may damage the
wiring within.
Step 8 : Lift up the Himelon.
Caution : Replace the Himelon if they are torn during dis-
assembling.
Step 9 : Detach the 4P Wire Socket.
Step 10 : Remove the Lower Front Panel Assembly.
Step 10 : Remove the Lower Front Panel Assembly.
Caution : Apply the Glue on the respective holes during
disassembling of Lower Front Panel Assembly.
disassembling of Lower Front Panel Assembly.
5
3 Exploded View
3.1.
Cabinet Parts Location (For SB-MAX700GSK/PHK)
With reference to original service manual (section 5.1) on page 17 for Model No. SB-MAX700GSK/PHK
Display