Panasonic SB-HS100APP / SB-HS100AE Service Manual ▷ View online
Type
1 way, 1 speaker system Bass-reflex
type
Speaker unit
Full range
6.5 cm (2-1/2”) Cone type x 1
Impedance
3
Ω
Input power (IEC)
125 W (MAX), 63 W (RATED)
Sound pressure level
80 dB/W (1.0 m)
Frequency range
84 Hz - 25 kHz (-16 dB)
SB-HS100APP
SB-HS100AE
Colour
(K)... Black Type
(K)... Black Type
92 Hz to 22 kHz (-10 dB)
Dimensions (W x H x D)
121 mm x 328 mm x 129 mm
(4-25/32” x 12-15/16” x 5-3/32”)
Mass
Approx. 1.0 kg (2.2 lbs)
Notes:
Specifications are subject to change without notice.
Speaker System
Specification
ORDER NO. MD0805010CE
A6
1 Assembling and Disassembling
“ATTENTION SERVICER”
Some chassis components may have sharp edges. Be careful when disassembling and servicing.
1. This section describes procedures for checking the operation and replacing the main components.
2. For reassembly after operation checks or replacement, reverse the respective procedures.
Special reassembly procedures are described only when required.
3. Select items from the following index when checks or replacement are required.
4. Refer to the Parts No. on the page of “Parts Location and Replacement Parts List” (Section 5), if necessary.
Below is the list of disassembly sections
• Disassembly of Stand
Disassembly of Net frame assembly
Disassembly of Woofer (SP1)
Disassembly of Rear cabinet assembly
Disassembly of Terminal
2
SB-HS100APP / SB-HS100AE
1.1. Disassembly of Stand
Step 1: Remove 3 screws.
Step 2: Remove stand.
1.2. Disassembly of Net frame
assembly
Follow (Step 1) to (Step 2) in item 1.1.
Step 1: Insert steel rule with cloth as shown.
Step 2: Apply force gently to push out the net frame assembly.
Caution: Do not exert too much force as it may damage the net
frame assembly.
frame assembly.
3
SB-HS100APP / SB-HS100AE
Step 3: Remove net frame assembly.
1.3. Disassembly of Woofer (SP1)
Follow (Step 1) to (Step 2) in item 1.1.
Follow (Step 1) to (Step 3) in item 1.2.
Step 1: Remove 12 screws.
Step 2: Detach the front panel.
4
SB-HS100APP / SB-HS100AE