Panasonic SB-HF560E / SB-HS860E / SB-HC560E Service Manual ▷ View online
1 Assembling and Disassembling
“ATTENTION SERVICER”
Some chassis components may have sharp edges. Be careful when disassembling and servicing.
1. This section describes procedures for checking the operation and replacing the main components.
2. For reassembly after operation checks or replacement, reverse the respective procedures.
2. For reassembly after operation checks or replacement, reverse the respective procedures.
Special reassembly procedures are described only when required.
3. Select items from the following index when checks or replacement are required.
4. Refer to the Parts No. on the page of “Parts Location and Replacement Parts List” (Section 6), if necessary.
4. Refer to the Parts No. on the page of “Parts Location and Replacement Parts List” (Section 6), if necessary.
Below is the list of disassembly sections
# For SB-HF560E-K1 / SB-HS860E-K
Disassembly of Upper box assembly
Disassembly of Upper rear cabinet assembly
Disassembly of Woofer (SP1)
Disassembly of Terminal
Disassembly of Lower box assembly
Disassembly of Lower rear cabinet assembly
Disassembly of Stand base assembly
Disassembly of Upper rear cabinet assembly
Disassembly of Woofer (SP1)
Disassembly of Terminal
Disassembly of Lower box assembly
Disassembly of Lower rear cabinet assembly
Disassembly of Stand base assembly
# For SB-HC560E-K1
Disassembly of Rear cabinet assembly
Disassembly of Woofer unit 1 (SP1)
Disassembly of Woofer unit 2 (SP1)
Disassembly of Terminal
Disassembly of Woofer unit 1 (SP1)
Disassembly of Woofer unit 2 (SP1)
Disassembly of Terminal
2
SB-HF560E / SB-HS860E / SB-HC560E
1.1. For SB-HF560E-K1 / SB-
HS860E-K
1.1.1. Disassembly of Upper box
assembly
Step 1: Remove the white (+) and blue (-) speaker wires.
Step 2: Detach the speaker wires from the groove of upper box
assembly.
Step 2: Detach the speaker wires from the groove of upper box
assembly.
Step 3: Remove 1 screw.
Step 4: Detach the upper box assembly as arrow shown.
1.1.2. Disassembly of Upper rear cabinet
assembly
Follow (Step 1) to (Step 4) in item 1.1.1.
Step 1: Remove 10 screws.
Step 2: Hold down the upper front panel and lift up the upper
rear cabinet assembly.
rear cabinet assembly.
3
SB-HF560E / SB-HS860E / SB-HC560E
Step 3: Flip the upper rear cabinet assembly sideway.
Step 4: Detach the grey (-) and red (+) speaker wires.
Caution: Ensure the speaker wires are connected to the
correct terminals during assembling.
Step 5: Remove upper rear cabinet assembly.
Caution: Ensure the speaker wires are connected to the
correct terminals during assembling.
Step 5: Remove upper rear cabinet assembly.
1.1.3. Disassembly of Woofer (SP1)
Follow (Step 1) to (Step 4) in item 1.1.1.
Follow (Step 1) to (Step 3) in item 1.1.2.
Follow (Step 1) to (Step 3) in item 1.1.2.
Step 1: Detach the grey (-) and red (+) speaker wires.
Step 2: Remove 4 screws.
Step 3: Remove woofer (SP1).
Step 3: Remove woofer (SP1).
4
SB-HF560E / SB-HS860E / SB-HC560E
1.1.4. Disassembly of Terminal
Follow (Step 1) to (Step 4) in item 1.1.1.
Follow (Step 1) to (Step 5) in item 1.1.2.
Follow (Step 1) to (Step 5) in item 1.1.2.
Step 1: Remove 1 screw.
Step 2: Remove terminal.
1.1.5. Disassembly of Lower box
assembly
Follow (Step 1) to (Step 4) in item 1.1.1.
Step 1: Pull out the speaker wires from inside the groove.
Step 2: Remove 1 screw (at lower box assembly).
Step 3: Remove 2 screws (at stand base assembly).
Step 4: Remove the speaker wires from the groove of stand
base assembly.
Step 3: Remove 2 screws (at stand base assembly).
Step 4: Remove the speaker wires from the groove of stand
base assembly.
5
SB-HF560E / SB-HS860E / SB-HC560E