Panasonic SB-HF465E / SB-HS465E / SB-HC465E Service Manual ▷ View online
For SB-HF465
Type
Type
1 way, 1 speaker system (Bass reflex)
Speaker unit(s)
Impedance 3
Ω
Full range
6.5 cm Cone type
Input power (IEC)
125 W* (Max)
Output sound pressure
80 dB/W (1.0 m)
Frequency range
87 Hz - 25 kHz (-16 dB)
98 Hz - 22 kHz (-10 dB)
98 Hz - 22 kHz (-10 dB)
Dimensions (W x H x D)
252 mm x 1123 mm x 234 mm
Mass
3.7 kg
For SB-HS465
Type
1 way, 1 speaker system (Bass reflex)
Speaker unit(s)
Impedance 3
Ω
Full range
6.5 cm Cone type
Input power (IEC)
125 W* (Max)
Output sound pressure
80 dB/W (1.0 m)
Frequency range
96 Hz - 25 kHz (-16 dB)
120 Hz - 22 kHz (-10 dB)
SB-HF465E
SB-HS465E
SB-HC465E
Colour
(S)... Silver Type
(K)... Black Type
(K)... Black Type
Dimensions (W x H x D)
92 mm x 135 mm x 95.4 mm
Mass
0.75 kg
For SB-HC465
Type
1 way, 1 speaker system (Bass reflex)
Speaker unit(s)
Impedance 3
Ω
Full range
6.5 cm Cone type
Input power (IEC)
125 W* (Max)
Output sound pressure
80 dB/W (1.0 m)
Frequency range
95 Hz - 25 kHz (-16 dB)
110 Hz - 22 kHz (-10 dB)
Dimensions (W x H x D)
270 mm x 92 mm x 95.4 mm
Mass
0.9 kg
Notes :
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
Speaker System
Specification
ORDER NO. MD0801007CE
* : Rating with low-cut filter equipped amplifier.
2
SB-HF465E / SB-HS465E / SB-HC465E
1 Assembling and Disassembling
“ATTENTION SERVICER”
Some chassis components may have sharp edges. Be careful when disassembling and servicing.
1. This section describes procedures for checking the operation and replacing the main components.
2. For reassembly after operation checks or replacement, reverse the respective procedures.
2. For reassembly after operation checks or replacement, reverse the respective procedures.
Special reassembly procedures are described only when required.
3. Select items from the following index when checks or replacement are required.
4. Refer to the Parts No. on the page of “Parts Location and Replacement Parts List” (Section 5), if necessary.
4. Refer to the Parts No. on the page of “Parts Location and Replacement Parts List” (Section 5), if necessary.
Below is the list of disassembly sections
• For SB-HF465E-S/K
Disassembly of Upper box assembly
Disassembly of Upper rear cabinet assembly
Disassembly of Woofer (SP1)
Disassembly of Terminal
Disassembly of Lower box assembly
Disassembly of Lower rear cabinet assembly
Disassembly of Stand base assembly
Disassembly of Upper rear cabinet assembly
Disassembly of Woofer (SP1)
Disassembly of Terminal
Disassembly of Lower box assembly
Disassembly of Lower rear cabinet assembly
Disassembly of Stand base assembly
• For SB-HS465E-S/K
Disassembly of Rear cabinet assembly
Disassembly of Woofer unit (SP1)
Disassembly of Terminal
Disassembly of Woofer unit (SP1)
Disassembly of Terminal
• For SB-HC465E-S/K
Disassembly of Rear cabinet assembly
Disassembly of Woofer unit (SP1)
Disassembly of Terminal
Disassembly of Woofer unit (SP1)
Disassembly of Terminal
3
SB-HF465E / SB-HS465E / SB-HC465E
1.1. For SB-HF465E-S/K
1.1.1. Disassembly of Upper box
assembly
Step 1: Detach the white (+) and blue (-) speaker wires.
Step 2: Pull out the speaker cable from the groove of upper
box assembly.
Step 2: Pull out the speaker cable from the groove of upper
box assembly.
Step 3: Remove 1 screw.
Step 4: Detach the upper box assembly.
4
SB-HF465E / SB-HS465E / SB-HC465E