Panasonic SB-HF330P / SB-HC230P / SB-HS230P / SB-HW330P / SB-BT330P / SB-BT330P-K Service Manual ▷ View online
9
Step 5: Remove the Lower Box Assembly.
Caution: Speaker wire is attached with Lower Box Assem-
bly, do not force to pull wire from the Lower Box Assembly.
Caution: Speaker wire is attached with Lower Box Assem-
bly, do not force to pull wire from the Lower Box Assembly.
3.1.5.
Disassembly of Speaker Wire
Follow (Step 1) to (Step 4) in item 3.1.1.
Follow (Step 1) to (Step 4) in item 3.1.4.
Follow (Step 1) to (Step 4) in item 3.1.4.
Step 1: Remove 4 screws.
Step 2: Hold down the Lower Front Cabinet and lift up the
Lower Rear Cabinet.
Lower Rear Cabinet.
10
Step 3: Remove Speaker Wire.
3.1.6.
Disassembly of Base Cover
Follow (Step 1) to (Step 4) in item 3.1.1.
Follow (Step 1) to (Step 4) in item 3.1.4.
Follow (Step 1) to (Step 4) in item 3.1.4.
Step 1: Remove 4 screws.
Step 2: Remove the Base Cover.
11
3.2.
Subwoofer Speaker (SB-
HW330P-K)
HW330P-K)
3.2.1.
Disassembly of Side Panel Unit
Step 1: Peel off the screw covers by using the pen knife.
Caution: Place it in original location during assembling.
Caution: Place it in original location during assembling.
Step 2: Remove 4 screws.
Step 3: Insert the flathead screwdriver into the grooves of the
Side Panel Unit.
Step 4: Lift up the Side Panel Unit slightly.
Side Panel Unit.
Step 4: Lift up the Side Panel Unit slightly.
Step 5: Insert two flathead screwdriver at the sides of the boss
and apply force to gently push out the Side Panel Unit as
shown.
Caution: Do not exert too much force as it may damage the
Side Panel Unit.
and apply force to gently push out the Side Panel Unit as
shown.
Caution: Do not exert too much force as it may damage the
Side Panel Unit.
Step 6: Lift up the Side Panel Unit by 30
° as shown.
Step 7: Slide out the Side Panel Unit as arrow shown.
12
Caution: During assembly of the Side Panel Unit, align the
bosses to their respective holes on the Speaker Cabinet
Assembly and attach it.
bosses to their respective holes on the Speaker Cabinet
Assembly and attach it.
3.2.2.
Disassembly of Passive Radiator
Follow (Step 1) to (Step 7) in item 3.2.1.
Step 1: Remove 8 screws.
Step 2: Lift up and remove Passive Radiator as arrow shown.
Click on the first or last page to see other SB-HF330P / SB-HC230P / SB-HS230P / SB-HW330P / SB-BT330P / SB-BT330P-K service manuals if exist.