Panasonic SB-HF330P / SB-HC230P / SB-HS230P / SB-HW330P / SB-BT330P / SB-BT330P-K Service Manual ▷ View online
3
1 Service Navigation
1.1.
System Information (SB-BT330P-K/S)
Below is the System breakdown:
SB-BT330P-K is use for the following main models:
SC-BT330
SC-PT580 (-K)
SC-BT330
SC-PT580 (-K)
SB-BT330P-S is use for the following main models:
SC-PT580 (-S)
SC-PT580 (-S)
1.2.
Front Speakers (SB-HF330P-K/S)
The illustrations and disassembly procedures for the Front Speakers will be described in this manual.
1.3.
Subwoofer (SB-HW330P-K)
The illustrations and disassembly procedures for the Subwoofer will be described in this manual.
Speaker System
SB-BT330P-K/S
Front Speakers
SB-HF330P-K/S
Center Speaker
SB-HC230P-K/S
Surround Speakers
SB-HS230P-K/S
Subwoofer
SB-HW330P-K
4
2 Specifications
Front Speakers (SB-HF330P-K/S)
Type
Type
1 way 1 speaker (Bass reflex)
Speaker unit(s)
Impedance 3
Ω
Full range
6.5 cm (2-1/2”) Cone type
Output sound pressure
78 dB/W (1 m)
Frequency range
85 Hz to 25 kHz (-16 dB),
95 Hz to 22 kHz (-10 dB)
Dimensions (W x H x D)
100 mm x 530 mm x 78 mm
(3-15/16” x 20-7/8” x 3-1/16”)
Mass [Weight]
Approx. 0.92 kg (2.03 lbs)
Center Speaker (SB-HC230P-K/S)
Type
Type
1 way 1 speaker (Bass reflex)
Speaker unit(s)
Impedance 6
Ω
Full range
6.5 cm (2-1/2”) Cone type
Output sound pressure
79 dB/W (1 m)
Frequency range
90 Hz to 25 kHz (-16 dB),
115 Hz to 22 kHz (-10 dB)
Dimensions (W x H x D)
145 mm x 85 mm x 71.5 mm
(5-23/32” x 3-11/32” x 2-13/16”)
Mass [Weight]
Approx. 0.6 kg (1.32 lbs)
Surround Speakers (SB-HS230P-K/S)
Type
Type
1 way 1 speaker (Bass reflex)
Speaker unit(s)
Impedance 3
Ω
Full range
6.5 cm (2-1/2”) Cone type
Output sound pressure
78 dB/W (1 m)
Frequency range
105 Hz to 25 kHz (-16 dB),
130 Hz to 22 kHz (-10 dB)
Dimensions (W x H x D)
80 mm x 118.5 mm x 68 mm
(3-5/32” x 4-11/16” x 2-11/16”)
Mass [Weight]
Approx. 0.4 kg (0.88 lbs)
Subwoofer (SB-HW330P-K)
Type
Type
1 way 1 speaker (Kelton type)
Speaker unit(s)
Impedance 6
Ω
Woofer
16 cm (6-1/2”) Cone type
Output sound pressure
78 dB/W (1 m)
Frequency range
35 Hz to 180 Hz (-16 dB),
40 Hz to 160 Hz (-10 dB)
Dimensions (W x H x D)
180.5 mm x 322 mm x 351 mm
(7-1/8” x 12-11/16” x 13-13/16”)
Mass [Weight]
Approx. 4.6 kg (10.1 lbs)
Notes:
1. Specifications are subject to change without notice.
1. Specifications are subject to change without notice.
5
3 Disassembly and Assembly Instructions
“ATTENTION SERVICER”
Some chassis components may have sharp edges. Be careful when disassembling and servicing.
This section describes procedures for checking the operation and replacing the main components.
For reassembly after operation checks or replacement, reverse the respective procedures.
For reassembly after operation checks or replacement, reverse the respective procedures.
Special reassembly procedures are described only when required.
Select items from the following index when checks or replacement are required.
Refer to the Parts No. on the page of “Exploded View and Replacement Parts List” (Section 5), if necessary.
Refer to the Parts No. on the page of “Exploded View and Replacement Parts List” (Section 5), if necessary.
Below is the list of disassembly sections
• Front Speakers (SB-HF330P-K/S)
Disassembly of Upper Box Assembly
Disassembly of Upper Rear Cabinet Assembly
Disassembly of Full Range Speaker (SP1)
Disassembly of Lower Box Assembly
Disassembly of Speaker Wire
Disassembly of Base Cover
Disassembly of Upper Rear Cabinet Assembly
Disassembly of Full Range Speaker (SP1)
Disassembly of Lower Box Assembly
Disassembly of Speaker Wire
Disassembly of Base Cover
• Subwoofer Speaker (SB-HW330P-K)
Disassembly of Side Panel Unit
Disassembly of Passive Radiator
Disassembly of Woofer Speaker (SP61)
Disassembly of Passive Radiator
Disassembly of Woofer Speaker (SP61)
6
3.1.
Front Speakers (SB-HF330P-K/
S)
S)
3.1.1.
Disassembly of Upper Box Assem-
bly
bly
Step 1: Detach the white (+) and blue (-) speaker wires.
Step 2: Release the speaker cable from the groove of Upper
Box Assembly.
Step 2: Release the speaker cable from the groove of Upper
Box Assembly.
Step 3: Remove 1 screw from Upper Box Assembly.
Step 4: Detach the Upper Box Assembly.