Panasonic SB-HF330P / SB-HC230P / SB-HS230P / SB-HW330P / SB-BT330P / SB-BT330P-K Service Manual ▷ View online
11
3.2.
Subwoofer Speaker (SB-
HW330P-K)
HW330P-K)
3.2.1.
Disassembly of Side Panel Unit
Step 1: Peel off the screw covers by using the pen knife.
Caution: Place it in original location during assembling.
Caution: Place it in original location during assembling.
Step 2: Remove 4 screws.
Step 3: Insert the flathead screwdriver into the grooves of the
Side Panel Unit.
Step 4: Lift up the Side Panel Unit slightly.
Side Panel Unit.
Step 4: Lift up the Side Panel Unit slightly.
Step 5: Insert two flathead screwdriver at the sides of the boss
and apply force to gently push out the Side Panel Unit as
shown.
Caution: Do not exert too much force as it may damage the
Side Panel Unit.
and apply force to gently push out the Side Panel Unit as
shown.
Caution: Do not exert too much force as it may damage the
Side Panel Unit.
Step 6: Lift up the Side Panel Unit by 30
° as shown.
Step 7: Slide out the Side Panel Unit as arrow shown.
12
Caution: During assembly of the Side Panel Unit, align the
bosses to their respective holes on the Speaker Cabinet
Assembly and attach it.
bosses to their respective holes on the Speaker Cabinet
Assembly and attach it.
3.2.2.
Disassembly of Passive Radiator
Follow (Step 1) to (Step 7) in item 3.2.1.
Step 1: Remove 8 screws.
Step 2: Lift up and remove Passive Radiator as arrow shown.
13
3.2.3.
Disassembly of Woofer Speaker
(SP61)
(SP61)
Follow (Step 1) to (Step 7) in item 3.2.1.
Follow (Step 1) to (Step 2) in item 3.2.2.
Follow (Step 1) to (Step 2) in item 3.2.2.
Step 1: Remove 4 screws.
Step 2: Detach the white (+) and blue/white (-) speaker wire.
Step 3: Remove Woofer Speaker (SP61) as arrow shown.
Step 3: Remove Woofer Speaker (SP61) as arrow shown.
14
3.3.
Replacement of Speaker Con-
nector Housing
nector Housing
3.3.1.
Disassembly
Step 1: Use a paper clip push the Speaker Wire head until it
hide inside the Speaker Connector Housing.
Step 2: Pull out the (+) and (-) speaker wire.
hide inside the Speaker Connector Housing.
Step 2: Pull out the (+) and (-) speaker wire.
3.3.2.
Assembly
Step 1: Use a pen knife slightly push up the speaker wire head
approximately 45
approximately 45
°.
Step 2: Insert the (+) speaker wire into the (+) hole of the
Speaker Connector Housing.
Note: Push in the speaker wire until hear the “click” sound.
Speaker Connector Housing.
Note: Push in the speaker wire until hear the “click” sound.
Step 3: Insert the (-) speaker wire into the (-) hole of the
speaker connector housing.
Note: Push in the speaker wire until hear the “click” sound.
speaker connector housing.
Note: Push in the speaker wire until hear the “click” sound.
Click on the first or last page to see other SB-HF330P / SB-HC230P / SB-HS230P / SB-HW330P / SB-BT330P / SB-BT330P-K service manuals if exist.