Panasonic SB-HF167GS / SB-HC270P / SB-HS270P / SB-HW370EG / SB-XH155EG Service Manual ▷ View online
7
3.1.4.
Disassembly of Lower Box Assem-
bly
bly
• Refer to “Disassembly of Upper Box Assembly”.
Step 1: Remove 2 screws.
Step 2: Release the Speaker Wire from groove of Base Stand
Assembly.
Step 2: Release the Speaker Wire from groove of Base Stand
Assembly.
Step 3: Remove the Lower Box Assembly.
Caution: Speaker Wire is attached with Lower Box Assem-
bly, do not force to pull wire from the Lower Box Assembly.
Caution: Speaker Wire is attached with Lower Box Assem-
bly, do not force to pull wire from the Lower Box Assembly.
3.1.5.
Disassembly of Speaker Wire
• Refer to “Disassembly of Upper Box Assembly”.
• Refer to “Disassembly of Lower Box Assembly”.
• Refer to “Disassembly of Lower Box Assembly”.
Step 1: Remove 10 screws.
Step 2: Lift up the Lower Rear Cabinet as arrow show.
8
Step 3: Remove Speaker Wire from groove.
Caution : During assembling, ensure the Speaker Wire is
properly insert into the grooves.
Caution : During assembling, ensure the Speaker Wire is
properly insert into the grooves.
3.1.6.
Disassembly of Base Cover
• Refer to “Disassembly of Upper Box Assembly”.
• Refer to “Disassembly of Lower Box Assembly”.
• Refer to “Disassembly of Lower Box Assembly”.
Step 1: Remove 4 screws.
Step 2: Remove the Base Plate.
9
3.2.
Replacement of Speaker Connector Housing
3.2.1.
Disassembly
Step 1: Use a paper clip push the Speaker Wire head until it
hide inside the Speaker Connector Housing.
Step 2: Pull out the (+) and (-) speaker wires.
hide inside the Speaker Connector Housing.
Step 2: Pull out the (+) and (-) speaker wires.
3.2.2.
Assembly
Step 1: Use a pen knife slightly push up the speaker wire head
approximately 45
approximately 45
°.
Step 2: Insert the (+) speaker wire into the (+) hole of the
Speaker Connector Housing.
Note: Push in the speaker wire until hear the “click” sound.
Speaker Connector Housing.
Note: Push in the speaker wire until hear the “click” sound.
Step 3: Insert the (-) speaker wire into the (-) hole of the
speaker connector housing.
Note: Push in the speaker wire until hear the “click” sound.
speaker connector housing.
Note: Push in the speaker wire until hear the “click” sound.
Step 4: Pull both speaker wires gently to ensure they lock-in
firmly.
Note: Repeat step1 to 3 if the speaker wires come out.
firmly.
Note: Repeat step1 to 3 if the speaker wires come out.
10
4 Wiring Connection Diagram
4.1.
Front Speakers (SB-HF167GS-K)
4.2.
Subwoofer (SB-HW370EG-K)
Click on the first or last page to see other SB-HF167GS / SB-HC270P / SB-HS270P / SB-HW370EG / SB-XH155EG service manuals if exist.