Panasonic SB-HF167GS / SB-HC270P / SB-HS270P / SB-HW370EG / SB-XH155EG Service Manual ▷ View online
5
3.1.
Front Speakers (SB-HF167GS-K)
3.1.1.
Dissassembly of Upper Box
Assembly
Assembly
Step 1: Remove the Bule (+) and Grey (-) wires.
Step 2: Pull out the Speaker Wire from the groove.
Step 2: Pull out the Speaker Wire from the groove.
Step 3: Remove 1 screw from Upper Box Assembly.
Step 4: Detach the Upper Box Assembly.
6
3.1.2.
Disassembly of Upper Rear Cabinet
Assembly
Assembly
• Refer to “Disassembly of Upper Box Assembly”.
Step 1: Remove 8 screws.
Step 2: Flip the Rear Cabinet Assembly and place it by the side
of Front Panel Assembly.
Step 3: Detach the Blue (+) and Grey (-) wires.
Step 4: Remove Rear Cabinet Assembly.
of Front Panel Assembly.
Step 3: Detach the Blue (+) and Grey (-) wires.
Step 4: Remove Rear Cabinet Assembly.
3.1.3.
Disassembly of Tweeter Speaker
(SP1)
(SP1)
• Refer to “Disassembly of Upper Box Assembly”.
• Follow (Step 1) to (Step 2) in item 3.1.2.
• Follow (Step 1) to (Step 2) in item 3.1.2.
Step 1: Remove 4 screws.
Step 2: Detach the Blue (+) and Grey (-) wires.
Step 3: Remove Tweeter Speaker (SP1).
Step 3: Remove Tweeter Speaker (SP1).
7
3.1.4.
Disassembly of Lower Box Assem-
bly
bly
• Refer to “Disassembly of Upper Box Assembly”.
Step 1: Remove 2 screws.
Step 2: Release the Speaker Wire from groove of Base Stand
Assembly.
Step 2: Release the Speaker Wire from groove of Base Stand
Assembly.
Step 3: Remove the Lower Box Assembly.
Caution: Speaker Wire is attached with Lower Box Assem-
bly, do not force to pull wire from the Lower Box Assembly.
Caution: Speaker Wire is attached with Lower Box Assem-
bly, do not force to pull wire from the Lower Box Assembly.
3.1.5.
Disassembly of Speaker Wire
• Refer to “Disassembly of Upper Box Assembly”.
• Refer to “Disassembly of Lower Box Assembly”.
• Refer to “Disassembly of Lower Box Assembly”.
Step 1: Remove 10 screws.
Step 2: Lift up the Lower Rear Cabinet as arrow show.
8
Step 3: Remove Speaker Wire from groove.
Caution : During assembling, ensure the Speaker Wire is
properly insert into the grooves.
Caution : During assembling, ensure the Speaker Wire is
properly insert into the grooves.
3.1.6.
Disassembly of Base Cover
• Refer to “Disassembly of Upper Box Assembly”.
• Refer to “Disassembly of Lower Box Assembly”.
• Refer to “Disassembly of Lower Box Assembly”.
Step 1: Remove 4 screws.
Step 2: Remove the Base Plate.
Click on the first or last page to see other SB-HF167GS / SB-HC270P / SB-HS270P / SB-HW370EG / SB-XH155EG service manuals if exist.