Panasonic SB-HF100P / SB-HS100P / SB-HC100P Service Manual ▷ View online
2
SB-HF100P / SB-HS100P / SB-HC100P
1 Assembling and Disassembling
“ATTENTION SERVICER”
Some chassis components may have sharp edges. Be careful when disassembling and servicing.
1. This section describes procedures for checking the operation and replacing the main components.
2. For reassembly after operation checks or replacement, reverse the respective procedures.
Special reassembly procedures are described only when required.
3. Select items from the following index when checks or replacement are required.
4. Refer to the Parts No. on the page of “Parts Location and Replacement Parts List” (Section 5), if necessary.
Below is the list of disassembly sections
• For SB-HF100P-K
Disassembly of Stand
Disassembly of Net frame assembly
Disassembly of Tweeter (SP1)
Disassembly of Woofer 1 (SP2)
Disassembly of Woofer 2 (SP2)
Disassembly of Rear cabinet assembly
Disassembly of Terminal
• For SB-HS100P-K
Disassembly of Stand
Disassembly of Net frame assembly
Disassembly of Full range (SP1)
Disassembly of Rear cabinet assembly
Disassembly of Terminal
• For SB-HC100P-K
Disassembly of Net frame assembly
Disassembly of Tweeter (SP1)
Disassembly of Woofer 1 (SP2)
Disassembly of Woofer 2 (SP2)
Disassembly of Rear cabinet assembly
Disassembly of Terminal
3
SB-HF100P / SB-HS100P / SB-HC100P
1.1. SB-HF100P-K
1.1.1. Disassembly of Stand
Step 1: Remove 3 screws.
Step 2: Remove stand.
1.1.2. Disassembly of Net frame
assemably
Follow (Step 1) to (Step 2) in item 1.1.1.
Step 1: Insert steel rule with cloth as shown.
Step 2: Apply force gently to push out the net frame assembly.
Caution: Do not exert too much force as it may damage the net
frame assembly.
frame assembly.
4
SB-HF100P / SB-HS100P / SB-HC100P
Step 3: Remove net frame assembly.
1.1.3. Disassembly of Tweeter (SP1)
Follow (Step 1) to (Step 2) in item 1.1.1.
Follow (Step 1) to (Step 3) in item 1.1.2.
Step 1: Remove 12 screws.
Step 2: Detach the front panel.
5
SB-HF100P / SB-HS100P / SB-HC100P