Panasonic SB-FS680P Service Manual ▷ View online
Type
2 way, 2 speaker system (Bass-ref.)
Speaker unit(s)
Impedance 6
Ω
Full range
6.5 cm (2-1/2”) Cone type
Super tweeter
Piezo type
Input power (IEC)
55 W (Max)
Output sound pressure
80 dB/W (1.0 m)
Cross over frequency
10 kHz
Frequency range
80 Hz - 22 kHz (-16 dB)
95 Hz - 20 kHz (-10 dB)
Dimensions (W x H x D)
218 mm x 1080 mm (Max)/984 mm
(Min) x 243 mm
(8-19/32” x 42-1/2” (Max)/38-3/4” (Min) x 9-9/16”)
Mass
2.6 kg (5.7 lbs)
Notes :
2004 Co. .
SB-FS680P
Colour
(S)... Silver Type
1. Specifications are subject to change without notice.
2.
Mass and dimensions are approximate.
n System : SC-HT680P-S
Music Center : SA-HT680P-S
Speaker System : SB-HT680P-S
Active Subwoofer : SB-W680P-S
n System : SC-HT680PC-S
Music Center : SA-HT680PC-S
Speaker System : SB-HT680P-S
Active Subwoofer : SB-W680P-S
n System : SC-HT680PL-S
Music Center : SA-HT680PL-S
Speaker System : SB-HT680P-S
Active Subwoofer : SB-W680P-S
SB-HT680P-S consists of : SB-FS680P-S (x 2), SB-FS681P-S (x 2)
and SB-PC680P-S (x 1)
Speaker System
Specification
ORDER NO. MD0412600C7
A6
1 Disassembly Process
3
1.1.
Disassembly of the Woofer
3
1.2.
Disassembly of the Piezo Speaker
3
1.3.
Disassembly of the Terminal
4
1.4.
Disassembly of the Pipes
5
1.5.
Disassembly of the Base Assembly
6
2 Connection of the Speaker Cables
7
3 Connection of Wiring Diagram
7
4 Cabinet Parts Location
8
5 Replacement Parts List
9
6 Packaging (SB-HT680P-S)
10
CONTENTS
Page
Page
2
SB-FS680P
1.1. Disassembly of the Woofer
Step 1: Remove 6 screws from the Rear Cabinet Assembly.
Step 2: Push the Front Panel forward to detach from the Rear
Cabinet Assembly as arrow shown.
Step 3: Detach the wires (+) red and (-) gray from the Woofer.
Cabinet Assembly as arrow shown.
Step 3: Detach the wires (+) red and (-) gray from the Woofer.
Step 4: Remove 4 screws from the Woofer.
1.2. Disassembly of the Piezo
Speaker
Repeat step 1 to step 2 in item 1.1.
Step 1: Remove the glue from the Piezo Speaker.
Step 2: Disconnect the Network Assembly.
Step 2: Disconnect the Network Assembly.
1 Disassembly Process
3
SB-FS680P
1.3. Disassembly of the Terminal
Repeat step 1 to step 2 in item 1.1.
Step 1: Detach the wires (+) red and (-) gray from the Terminal.
Step 2: Remove 1 screw from the Terminal.
Step 3: Remove the Terminal from the Rear Cabinet
Assembly.
Assembly.
4
SB-FS680P