Panasonic SB-AK330EG Service Manual ▷ View online
Type
3 way, 3 speaker system (Bass reflex)
Speaker(s)
Woofer
16 cm cone type
Tweeter
6 cm cone type
Super tweeter
Piezo type
Impedance
HIGH
5
Ω
LOW
5
Ω
Input power (IEC)
HIGH
90 W (Max)
LOW
90 W (Max)
Output sound pressure level
83 dB/W (1.0 m)
Cross over frequency
2.6 kHz, 10 kHz
Frequency range
37 Hz - 23 kHz (-16 dB)
44 Hz - 22 kHz (-10 dB)
1
Connection of the Speaker Cables
2
2
Connection of the Speaker Wiring
3
3
Cabinet Parts Location
3
2004 Co. .
SB-AK330EG
Colour
(K)... Black Type
Dimensions (W x H x D)
240 x 330 x 229 mm
Mass
3.2 kg
Notes :
1. Specifications are subject to change without notice.
2. Mass and dimensions are approximate.
3. The labels “HIGH” and “LOW” on the rear of the speakers refer to
High frequency and Low frequency.
High frequency and Low frequency.
■System : SC-AK330E-K
Music Center : SA-AK330E-K
Front Speaker : SB-AK330EG-K
■System : SC-AK330EE-K
Music Center : SA-AK330EE-K
Front Speaker : SB-AK330EG-K
■System : SC-AK330EG-K
Music Center : SA-AK330EG-K
Front Speaker : SB-AK330EG-K
4
Replacement Parts List
4
5
Packaging
4
Speaker System
Specification
CONTENTS
Page
Page
ORDER NO. MD0412588C8
·
Be sure to connect speaker cables before connecting the
AC power supply cord.
AC power supply cord.
·
The load impedance of any speaker used with this unit must
be 5
be 5
Ω
.
·
Be sure to connect the cable from the right speaker to the
right terminal and the cable from the left speaker to the left
terminal.
right terminal and the cable from the left speaker to the left
terminal.
1. Strip off the outer covering, and twist the center conductor.
Make sure the bare ends of the wires are not unravelled. (If
they are, twist them tight again.)
they are, twist them tight again.)
2. Insert the wire to the rear panel of the unit and close the
lever.
Notes :
·
To prevent damage to circuitry, never short-circuit positive
(+) and negative (-) speaker wires.
(+) and negative (-) speaker wires.
·
Be sure to connect only positive (red) wires to positive (+)
terminals and negative (black) wires to negative (-)
terminals.
terminals and negative (black) wires to negative (-)
terminals.
Placement
Place the front speakers so that the super tweeter is on the
inside.
inside.
Notes :
·
Keep your speakers at least 10 mm away from the system
for proper ventilation.
for proper ventilation.
·
These speakers do not have magnetic shielding. Do not
place them near televisions, personal computers or other
devices easily influenced by magnetism.
place them near televisions, personal computers or other
devices easily influenced by magnetism.
·
You cannot take the front net off the speakers.
Connection
Use only the supplied speakers.
The combination of the main unit and speakers provide the
best sound.
best sound.
Using other speakers can damage the unit and sound quality
will be negatively affected.
will be negatively affected.
Notes on speaker use
·
You can damage your speakers and shorten their useful life
if you play sound at high levels over extended periods.
if you play sound at high levels over extended periods.
·
Reduce the volume in the following cases to avoid damage.
−
−
−
−
When playing distorted sound.
−
−
−
−
When adjusting the sound quality.
1 Connection of the Speaker Cables
2
SB-AK330EG
2 Connection of the Speaker Wiring
3 Cabinet Parts Location
3
SB-AK330EG
4 Replacement Parts List
Notes :
·
Important safety notice :
When replacing any of these components, be sure to use
only manufacturer’s specified parts shown in the parts list.
only manufacturer’s specified parts shown in the parts list.
·
[M] markings in the Remarks columns indicates parts
supplied by PAVCSG.
supplied by PAVCSG.
Ref.
No.
Part No.
Part Name & Description
Remarks
CABINET AND CHASSIS
1
RYKX0293-K
SPK CABINET ASS’Y(L)
[M]
1
RYKX0294-K
SPK CABINET ASS’Y(R)
[M]
2
RFKGBAK330EA
FRONT PANEL ASS’Y(L)
[M]
2
RFKGBAK330EB
FRONT PANEL ASS’Y(R)
[M]
2-1
REEX0393
PIEZZO ASS’Y
[M]
Ref.
No.
Part No.
Part Name & Description
Remarks
3
XTB4+16AFZ
SCREW (FRONT PANEL)
[M]
4
XTB4+10G
TAPPING SCREW
[M]
5
RGNX0260A-K
SPEC SHEET
[M]
6
RKA0072-KJ
LEG CUSHION
[M]
PACKING MATERIALS
P1
RPNX0284-1
POLYFOAM
[M]
P2
RPFX0101-2
MIRAMAT
[M]
CAPACITOR
C1
ECEA1HAY4R7S
4.7uf 50V
[M]
SPEAKERS
SP1
EAST6PH08N6
TWEETER
[M]
SP2
L0AA16A00014
WOOFER
[M]
5 Packaging
4
SB-AK330EG
FLE0412W/S
Display