Panasonic SA-XH165EE / SA-XH165GS / SC-XH165EE Service Manual ▷ View online
49
Step 5 Detach Transmitter Chassis Unit from Rear Panel.
Step 6 Detach 17P FFC at the connector (CN3001) on Wire-
less Adapter P.C.B..
less Adapter P.C.B..
Step 7 Remove 1 screw.
Step 8 Release 2 catches.
Caution: During assembling, ensure that Wireless Adapter
P.C.B. is seated at the locators & fully catched Transistor
Chassis.
Step 9 Remove Wireless Adapter P.C.B..
Step 8 Release 2 catches.
Caution: During assembling, ensure that Wireless Adapter
P.C.B. is seated at the locators & fully catched Transistor
Chassis.
Step 9 Remove Wireless Adapter P.C.B..
Caution: During assembly, ensure Wireless Ground Spring
is properly inserted and fully catched onto Wireless
Adapter P.C.B..
is properly inserted and fully catched onto Wireless
Adapter P.C.B..
50
10.5. Disassembly of Rear Panel
• Refer to “Disassembly of Top Cabinet”.
Step 1 Remove 11 screws.
Step 2 Remove 1 screw.
Step 2 Remove 1 screw.
Step 3 Release the tabs at both side of the Rear Panel in the
direction of arrow.
direction of arrow.
Step 4 Remove the Rear Panel.
10.6. Disassembly of Fan
• Refer to “Disassembly of Top Cabinet”
Step 1 Lift up the Wire Clamper.
Step 2 Detach the Fan connector (CN5401) on D-Amp P.C.B..
Step 3 Remove 2 screws.
Step 4 Lift up to remove Fan.
Step 4 Lift up to remove Fan.
51
10.7. Disassembly of Front Panel
Block Assembly
• Refer to “Disassembly of Top Cabinet”
Step 1 Detach 4P Cable at the connector (CN6001) on Panel
P.C.B..
Step 2 Release 2 tabs at both side of the Front Panel Block
Assembly in the direction of arrow.
Caution: Do not exert strong force when releasing the tabs.
Assembly in the direction of arrow.
Caution: Do not exert strong force when releasing the tabs.
Step 3 Release 3 tabs at the Bottom Chassis.
Caution (1): Do not exert strong force when releasing the
tabs.
Caution (2): During assembling, ensure that Front Panel
Block Assembly is properly inserted & fully catched onto
Bottom Chassis.
Caution (1): Do not exert strong force when releasing the
tabs.
Caution (2): During assembling, ensure that Front Panel
Block Assembly is properly inserted & fully catched onto
Bottom Chassis.
Step 4 Detach the Front Panel Block Assembly.
52
Caution: During assembling, ensure that 4P Cable, Cable
are properly dressed through slots of Bottom Chassis.
are properly dressed through slots of Bottom Chassis.
10.8. Disassembly of Panel P.C.B.
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Front Panel Block Assembly”.
• Refer to “Disassembly of Front Panel Block Assembly”.
Step 1 Detach 28P FFC at the connector (P6001) on Panel
P.C.B..
Step 2 Remove 2 screws.
P.C.B..
Step 2 Remove 2 screws.
Step 3 Slightly lift up the Panel P.C.B..
Step 4 Remove the Panel P.C.B..
Step 4 Remove the Panel P.C.B..
Caution (1): During assembling, ensure that Panel P.C.B. is
properly located & fully seated onto Bottom Chassis
before screwing.
Caution (2): During assembling, ensure that Panel P.C.B. is
properly inserted under the rib of Bottom Chassis.
properly located & fully seated onto Bottom Chassis
before screwing.
Caution (2): During assembling, ensure that Panel P.C.B. is
properly inserted under the rib of Bottom Chassis.
Click on the first or last page to see other SA-XH165EE / SA-XH165GS / SC-XH165EE service manuals if exist.