DOWNLOAD Panasonic SA-VK880EE / SC-VK880EE Service Manual ↓ Size: 11.7 MB | Pages: 127 in PDF or view online for FREE

89

Step 12 Release the tabs at the bottom of  front panel.

Step13 Remove front panel unit in the direction of arrow.

Step 14 Remove 1 screw at Mic P.C.B..
Step 15 Remove 2 screws on USB bracket.
Step 16 Remove 2 screws on Music Port P.C.B..
Step 17 Remove 4 screws at Deck Mechanism unit.
Step 18 Remove Mic P.C.B..

Step 19 Remove USB P.C.B. with USB bracket.
Step 20 Remove Music Port P.C.B..
Step 21 Push the lever upward as arrow shown to open the
cassette lid assembly.
Step 22 Remove Deck Mechanism unit.

90

Step 23 Remove 2 screws.
Step 24 Remove shield plate.

Step 25 Position front panel assembly according to the diagram
show.
Step 26 Connect 27P FFC at connector (CN2807) on Main
P.C.B..

Step 27 Connect 2P cable at connector (CN2813) on Main
P.C.B..
Step 28 Connect 5P cable at connector (CN1113) on USB
P.C.B..
Step 29 Connect 10P FFC at connector (CN2806) on Main
P.C.B..
Step 30 Connect 2P cable at connector (CN2812) on Main
P.C.B..

Step 31 Connect 10P FFC at the connector (CN2752) on Main
P.C.B.. 
Step 32 Connect 12P FFC at the connector (CN2753) on Main
P.C.B.. 
Step 33 Check and repair panel P.C.B., Deck P.C.B., Volume
P.C.B., Music Port P.C.B. and Mic P.C.B.. 

91

Step 1 Remove the top cabinet.
Step 2 Remove the DVD Mechanism Unit (CR14D).

Step 3 Detach 17P FFC at connector (CN5050) on D-Amp
P.C.B..
Step 4 Detach 8P cable at connector (CN5500) on D-Amp
P.C.B..
Step 5 Remove 2 screws at Inner chassis assembly.

Step 6 Remove 4 screws at the rear panel.

Step 7 Lift up the D-Amp P.C.B. together with the Inner chassis
assembly as arrow shown.

Step 8 Remove 2 screws from D-Amp P.C.B..
Step 9 Lift up D-Amp P.C.B. as arrow shown.

92

Step 10 Position DVD Mechanism unit (CR14D) according to
the diagram shown.
Step 11 Connect  50P FFC cable at the connector (CN2801) on
Main P.C.B..
Step 12 Connect  11P FFC cable at the connector (CN2805) on
Main P.C.B..
Step 13 Connect  5P cable at the connector (CN1113) on USB
P.C.B..

Step 14 Position D-Amp P.C.B. according to diagram shown. 
Step 15 Attach original cable with extension cable (REXX0683)
(8P cable from H5801 to CN5500). 
Step 16 Connect extension cable (REEX0930) (17P cable from
CN2808 to CN5050). 
Step 17 Check and repair D-Amp P.C.B. according to the dia-
gram shown. 

• Follow (Step 1) to (Step 9) of item 11.3

Step 1 Detach wire connector at connector (CN5802) on SMPS
P.C.B..
Step 2 Remove 4 screws on SMPS P.C.B..
Step 3 Remove 2 screws on AC Inlet P.C.B..
Step 4 Cut 2 tie wraps onto wires.
Step 5 Remove ground wire.

Step 6 Remove 1 screw at the rear panel.