Panasonic SA-PT560EE / SC-PT560EE / SC-PT560EE Simplified Service Manual ▷ View online
7.10. Disassembly of Mic P.C.B.
•
•
•
•
Follow (Step 1) to (Step 3) of Item 7.3.
•
•
•
•
Follow (Step 1) to (Step 8) of Item 7.6.
•
•
•
•
Follow (Step 1) to (Step 2) of Item 7.9.
•
•
•
•
Disassembly of Mic fixing P.C.B
•
•
•
•
Step 1 Remove 1 screw on Mic fixing P.C.B.
•
•
•
•
Step 2 Remove the Mic fixing P.C.B.
•
•
•
•
Step 3 Remove Mic P.C.B.
7.11. Disassembly of DVD Lid
•
•
•
•
Follow (Step 1) to (Step 3) of Item 7.3.
•
•
•
•
Follow (Step 1) to (Step 8) of Item 7.6.
•
•
•
•
Disassembly of DVD Lid Holder
Step 1 Remove 1 screw from the DVD lid holder.
Step 2 Remove the DVD lid holder.
Caution Note: Keep the DVD lid holder in safe place. Avoid
denting it. Place it back during assembling.
denting it. Place it back during assembling.
Step 3 Open the DVD lid in the direction of arrow (1), until it is
aligned parrallel with the front panel.
aligned parrallel with the front panel.
Step 4 Lift the door spring in the direction of arrow (2).
Step 5 Move the shaft of the DVD lid in the direction of arrow
(3).
(3).
Step 6 Remove the DVD lid in the direction of arrow (4).
7.12. Disassembly of Ipod Cradle
P.C.B.
•
•
•
•
Follow (Step 1) to (Step 3) of Item 7.3.
•
•
•
•
Follow (Step 1) to (Step 7) of Item 7.6.
Step 1 Peel off the portion of the pana badge (paste type) with
a pen knife.
a pen knife.
Step 2 Remove the screw for cradle.
Caution Note: Keep the screw in safe place. Place it back
during assembling.
during assembling.
Step 3 Flip the Ipod cradle unit for 45 degree as the direction
of arrow.
of arrow.
21
SA-PT560EE
Step 4 Remove the connector cover.
Step 5 Use a flat head screw driver(0.5-0.7mm) to release the
catches according to the diagram show.
catches according to the diagram show.
Step 6 Remove the Cradle Cover A in the direction of Arrows.
Step 7 Remove 2 screws on the Ipod Cradle P.C.B.
Step 8 Remove Ipod Cradle P.C.B.
7.13. Disassembly of AC Inlet P.C.B.
•
•
•
•
Follow (Step 1) to (Step 3) of Item 7.3.
•
•
•
•
Disassembly of AC Inlet Shield Plate Unit.
Step 1 Remove 1 screw at the rear panel.
Step 2 Remove 2 screws from the AC Inlet shield plate unit.
Step 3 Remove the AC Inlet shield plate unit.
22
SA-PT560EE
Caution Note: Keep the AC Inlet shield plate unit in safe
place. Avoid denting it. Place it back during assembling.
place. Avoid denting it. Place it back during assembling.
Step 4 Remove the D-Amp P.C.B. bracket.
Step 5 Remove AC Inlet P.C.B.
Caution Note: Keep the D-Amp P.C.B. bracket in safe
place. Avoid denting it. Place it back during assembling.
place. Avoid denting it. Place it back during assembling.
Special Note: During reassembling procedures, ensure the
P.C.B. is seated properly at the locators.
P.C.B. is seated properly at the locators.
7.14. Disassembly of Main P.C.B.
•
•
•
•
Follow (Step 1) to (Step 3) of Item 7.3.
Step 1 Remove 3 screws at the rear panel.
Step 2 Remove 2 screws on Main P.C.B.
Step 3 Detach 17P FFC cable at the connector (CN2007) on
the Main P.C.B.
the Main P.C.B.
Step 4 Detach 4P FFC cable at the connector (CN2013) on the
Main P.C.B.
Main P.C.B.
Step 5 Detach 13P cable at the connector (CN2016) on the
Power Supply P.C.B.
Power Supply P.C.B.
Step 6 Detach 28P cable at the connector (CN6001) on the
Power Supply P.C.B.
Power Supply P.C.B.
Step 7 Detach 12P cable at the connector (CN7000) on the Mic
P.C.B.
P.C.B.
Step 8 Detach 14P cable at the connector (CN6300) on the
Wireless Adaptor P.C.B.
Wireless Adaptor P.C.B.
Step 9 Detach Main P.C.B. from the rear panel.
Step 10 Turn over Main P.C.B. to detach 17P FFC cable at the
connector (CN2009) on the Main P.C.B.
connector (CN2009) on the Main P.C.B.
Step 11 Detach 50P FFC cable at the connector (CN2001) on
the Main P.C.B.
the Main P.C.B.
Step 13 Detach 22P FFC cable at the connector (CN2801) on
the Main P.C.B.
the Main P.C.B.
Step 13 Remove Main P.C.B.
23
SA-PT560EE
Special Note: During reassembling procedures, ensure the
P.C.B. is seated properly at the locators.
P.C.B. is seated properly at the locators.
7.15. Disassembly of D-Amp P.C.B.
•
•
•
•
Follow (Step 1) to (Step 3) of Item 7.3.
•
•
•
•
Follow (Step 1) to (Step 4) of Item 7.13.
•
•
•
•
Follow (Step 1) to (Step 5) of Item 7.14.
Step 1 Move aside Main P.C.B. and position it according to the
diagram shown.
diagram shown.
Step 2 Remove 2 screws on D-Amp P.C.B.
Step 3 Detach 17P cable at the connector (CN5050) on D-Amp
P.C.B.
P.C.B.
Step 4 Detach 8P cable at the connector (CN5500) on D-Amp
P.C.B.
P.C.B.
Step 5 Twist the wire clamper to detach 3P cable at the
connector (CN5501) on D-Amp P.C.B.
connector (CN5501) on D-Amp P.C.B.
Step 6 Remove 2 screws at the rear panel.
Step 7 Release the tab of the rear panel in the direction of
arrow.
arrow.
Step 8 Remove D-Amp P.C.B.
Special Note: During reassembling procedures, ensure the
P.C.B. is seated properly at the locators.
P.C.B. is seated properly at the locators.
24
SA-PT560EE
Click on the first or last page to see other SA-PT560EE / SC-PT560EE / SC-PT560EE service manuals if exist.