DOWNLOAD Panasonic SA-PT170EE / SC-PT175EE Service Manual ↓ Size: 7.97 MB | Pages: 127 in PDF or view online for FREE

64

• Follow (Step 1) to (Step 3) of Item 9.3
• Follow (Step 1) to (Step 4) of Item 9.4

Step 1: Release the guide and slide the traverse slide plate (rib) 
as arrows shown.

 

Step 2: Lift up the Traverse unit approximately 45

°

 as shown.

 

Step 3: Slide out the Traverse unit as arrow shown.

Caution: Do not touch the surface of the Traverse unit and 
place it so that the OPU is on top.

65

Step 1: Release the guide and slide the traverse slide plate (rib) 
as arrows shown.

Step 2: Slot the traverse unit approximately 45

°

 into the mecha 

chassis as arrow shown.

Step 3: Place down the traverse unit as arrow shown.

Step 4: Release the guide and slide the traverse slide plate (rib) 

in the direction of arrows shown to lock in the traverse unit.

66

Step 1 Remove the top cabinet to service Main P.C.B.

Step 1 Remove the top cabinet.
Step 2 Remove 3 screws at the rear panel.
Step 3 Remove 2 screws on Main P.C.B.
Step 4 Remove 1 ground spring on Main P.C.B.
Step 5 Detach 7P cable at the connector (CN2010) on Main
P.C.B.
Step 6 Detach 19P FFC at the connector (CN2007) on Main
P.C.B.
Step 7 Detach 10P FFC at the connector (CN2005) on Main
P.C.B.

Step 8 Detach Main P.C.B. from the rear panel and position it
according to the diagram shown.
Step 9 Detach 8P cable at the connector (CN2017) on SMPS
P.C.B.
Step 10 Detach 14P cable at the connector (CN2016) on
SMPS P.C.B.
Step 11 Detach 5P cable at the connector (FP9001) on DVD
Module P.C.B. 

Step 12 Flip the Main P.C.B. and position it according to the
diagram shown.
Step 13 Connect extension cable REEX0815 (17P FFC from
CN2009 to CN5050).
Step 14 Connect extension cable REEX1009 (50P FFC from
FP8101 to CN2001).
Step 15 Remove the front panel assembly.

67

Step 16 Position Main P.C.B. according to the diagram shown.
Step 17 Turn the front panel assembly and position it according
to diagram shown.
Step 18 Connect 7P cable at the connector (CN2010) on Main
P.C.B. 
Step 19 Connect 19P FFC at the connector (CN2007) on Main
P.C.B. 

Step 20 Attach original cable with extension cable REXX0653-
J (14P cable from H2901 to CN2016). 
Step 21 Attach original cable with extension cable REXX0724
(8P cable from H2900 to CN2017). 

Step 22 Remove 1 screws on AC Inlet P.C.B. 
Step 23 Remove P.C.B bracket. 
Step 24 Remove 3 screws on Analog Amp P.C.B. 
Caution: Keep the P.C.B. bracket in safe place. Avoid dent-
ing it. Place it back during assembling.

Step 25 Twist the wire clamper to detach 3P cable at the con-
nector (CN5704) on Analog Amp P.C.B.