Panasonic SA-PM500EG / SA-PM500EF / SA-PM500EP / SC-PM500EP Service Manual ▷ View online
65
Step 10 : Connect 5P Wire at the connector (CN7902) on Main
P.C.B..
Step 11 : Connect 27P FFC at the connector (CN7002) on
Main P.C.B..
P.C.B..
Step 11 : Connect 27P FFC at the connector (CN7002) on
Main P.C.B..
Step 12 : Check and repair Main P.C.B. (Side B) according to
the diagram shown.
the diagram shown.
66
9.5.
Checking & Repairing of Main
P.C.B. (Side A)
P.C.B. (Side A)
Step 1 : Remove Top Cabinet Block.
Step 2 : Remove Front Panel Block.
Step 3 : Remove SMPS Block.
Step 4 : Remove Main P.C.B. Unit.
Step 5 : Remove CD Mechanism Unit (BRS1C).
Step 6 : Remove the Rivet.
Caution : Keep the Rivet in safe place & ensure the Rivet
fully insert to 5P wire and onto the Main Shield Top during
assembling.
Step 2 : Remove Front Panel Block.
Step 3 : Remove SMPS Block.
Step 4 : Remove Main P.C.B. Unit.
Step 5 : Remove CD Mechanism Unit (BRS1C).
Step 6 : Remove the Rivet.
Caution : Keep the Rivet in safe place & ensure the Rivet
fully insert to 5P wire and onto the Main Shield Top during
assembling.
Step 7 : Remove 4 screws.
Step 8 : Slot the 14P FFC out of the Ferrite Core.
Caution : During assembling, insert the 14P FFC through
the Ferrite Core.
Step 8 : Slot the 14P FFC out of the Ferrite Core.
Caution : During assembling, insert the 14P FFC through
the Ferrite Core.
Step 9 : Remove Main Shield Top.
Step 10 : Remove Main Chassis.
Caution : During assembling, ensure the Main P.C.B. is
properly seated onto the locator.
Caution : During assembling, ensure the Main P.C.B. is
properly seated onto the locator.
67
Step 11 : Connect 14P FFC at the connector (CN6801) on
Main P.C.B..
Main P.C.B..
Step 12 : Connect 5P Cable at the connector (CN1002) on
iPhone P.C.B..
iPhone P.C.B..
Step 13 : Connect 5P Wire at the connector (CN7902) on Main
P.C.B..
Step 14 : Connect 27P FFC at the connector (CN7002) on
Main P.C.B..
P.C.B..
Step 14 : Connect 27P FFC at the connector (CN7002) on
Main P.C.B..
Step 15 : Connect 6P Cable at the connector (CN905) on
SMPS P.C.B..
SMPS P.C.B..
68
Step 16 : Check and repair Main P.C.B. (Side A) according to
the diagram shown.
Caution : During assembling, replace the Thermal Pad if it
is torn.
the diagram shown.
Caution : During assembling, replace the Thermal Pad if it
is torn.
Click on the first or last page to see other SA-PM500EG / SA-PM500EF / SA-PM500EP / SC-PM500EP service manuals if exist.