Panasonic SA-PM41E / SA-PM41EB / SA-PM41EG Service Manual ▷ View online
1. Turn off by pressing power SW in the body.
2. Unplug AC power cord after the indication of [GOOD-BYE],
2. Unplug AC power cord after the indication of [GOOD-BYE],
then disassemble the body.
11.24.1. Gear for servicing information
· This unit has a gear which used for checking items
(open/close of disc tray, up/down operation of traverse unit
by manually) when servicing. (For gear information, that is
described on the items for disassembly procedures.)
by manually) when servicing. (For gear information, that is
described on the items for disassembly procedures.)
· For preparation of gear (for servicing), perform the
procedures as follows.
· In case of re-servicing the same set, the “ gear for servicing”
may be took off because it had been used. So, the “gear for
servicing” must be stored.
servicing” must be stored.
1. Remove the gear attached to top cover of CD loading
mechanism.
2. Insert the hexagonal wrench (2.5mm) into the gear.
3. Disassemble the body, and take out CD loading
mechanism.
4. Perform disassembly according to the following procedure
for disassembly.
11.23. Procedure for removing CD loading mechanism
11.24. CR16 mechanism disassembly procedure
29
SA-PM41E / SA-PM41EB / SA-PM41EG
11.24.2. Replacement for the disc tray
· Follow the (Step 1) - (Step 6) of Item 11.2.
· Follow the (Step 1) - (Step 3) of Item 11.3.
· Follow the (Step 1) - (Step 4) of Item 11.5.
· Follow the (Step 1) - (Step 3) of Item 11.8.
· Follow the (Step 1) - (Step 5) of Item 11.13.
· Follow the (Step 1) - (Step 3) of Item 11.3.
· Follow the (Step 1) - (Step 4) of Item 11.5.
· Follow the (Step 1) - (Step 3) of Item 11.8.
· Follow the (Step 1) - (Step 5) of Item 11.13.
30
SA-PM41E / SA-PM41EB / SA-PM41EG
31
SA-PM41E / SA-PM41EB / SA-PM41EG
11.24.3. Replacement for the traverse deck
· Follow the (Step 1) - (Step 6) of Item 11.2.
· Follow the (Step 1) - (Step 3) of Item 11.3.
· Follow the (Step 1) - (Step 4) of Item 11.5.
· Follow the (Step 1) - (Step 3) of Item 11.8.
· Follow the (Step 1) - (Step 5) of Item 11.13.
· Follow the (Step 1) - (Step 10) of Item 11.24.2
· Follow the (Step 1) - (Step 3) of Item 11.3.
· Follow the (Step 1) - (Step 4) of Item 11.5.
· Follow the (Step 1) - (Step 3) of Item 11.8.
· Follow the (Step 1) - (Step 5) of Item 11.13.
· Follow the (Step 1) - (Step 10) of Item 11.24.2
11.24.4. Disassembly for CD loading unit
· Follow the (Step 1) - (Step 6) of Item 11.2.
· Follow the (Step 1) - (Step 3) of Item 11.3.
· Follow the (Step 1) - (Step 4) of Item 11.5.
· Follow the (Step 1) - (Step 3) of Item 11.8.
· Follow the (Step 1) - (Step 5) of Item 11.13.
· Follow the (Step 1) - (Step 10) of Item 11.24.2
· Follow the (Step 1) - (Step 4) of Item 11.24.3
· Follow the (Step 1) - (Step 3) of Item 11.3.
· Follow the (Step 1) - (Step 4) of Item 11.5.
· Follow the (Step 1) - (Step 3) of Item 11.8.
· Follow the (Step 1) - (Step 5) of Item 11.13.
· Follow the (Step 1) - (Step 10) of Item 11.24.2
· Follow the (Step 1) - (Step 4) of Item 11.24.3
32
SA-PM41E / SA-PM41EB / SA-PM41EG
Click on the first or last page to see other SA-PM41E / SA-PM41EB / SA-PM41EG service manuals if exist.