Panasonic SA-HT885WEE Service Manual ▷ View online
12.4. Loading section
1. Spread the tabs at the both sides and push out the drive
arm shaft.
2. Hook the lock lever spring on the lock lever projection part
temporarily.
3. Unlock the tab and remove the lock lever.
4. Remove the belt.
5. Unlock the tab and remove the pulley.
6. Remove the relay gear.
5. Unlock the tab and remove the pulley.
6. Remove the relay gear.
7. Turn the change lever in the arrow direction till it stops.
8. Hook the change lever spring on the change lever project
8. Hook the change lever spring on the change lever project
part temporarily.
29
SA-HT885WEE
9. Pull the lever (B) in the bottom side to your side and remove
the change lever.
10. Remove the drive rack, the sub rack and the drive gear.
12.5. Tray Loading P.C.B.
1. Unscrew the screws
12.6. Optical Pickup Unit
12.6.1. Procedure for Disassembling the
Optical Pickup Unit
1. Spread the tabs to push in the pin.
2. Remove the pins.
3. Remove the traverse deck.
30
SA-HT885WEE
4. Move the optical pickup unit in the arrow direction till it
stops.
5. Unscrew the screws.
6. Remove the drive rack.
7. Unscrew the screw
8. Slide the shaft in the arrow direction.
8. Slide the shaft in the arrow direction.
9. Lift the optical pickup unit with the shaft.
10. Remove the optical pickup unit.
31
SA-HT885WEE
11. Pull the shaft and the rubber out.
(Assembling the optical pickup unit)
1. Pass the intermediate FPC through the frame hole.
2. Align the guide section of the optical pickup unit with the
2. Align the guide section of the optical pickup unit with the
rail.
3. Install the shaft top to the holder.
12.7. Traverse Motor and Spindle
Motor
1. Unscrew the screws.
2. Remove the cover while lifting the inner gear.
32
SA-HT885WEE
Click on the first or last page to see other SA-HT885WEE service manuals if exist.