Panasonic SA-HT335EE Service Manual ▷ View online
Error Code
Error Content
Additional error explanation
F890
Sending message when message is
being sent to AV task
being sent to AV task
Sending message to AV task
F891
Message couldn’t be sent to AV task Begin sending message to AV task
F893
FROM falsification
F894
EEPROM abnormality
F895
Language area abnormality
Firm version agreement check for factory preset setting failure prevention
F896
No existence model
Firm version agreement check for factory preset setting failure prevention
F897
Initialize is not completed
Initialize completion check for factory preset setting failure prevention
F898
Disagreement
of
hardware
and
software
Unsuitable combination of AV DECORDER, SDRAM and FLASH ROM
(firmware)
(firmware)
F8A0
Message command is not appropriate Begin sending message to AV task
Note:
An error code will be canceled if a power supply is turned OFF.
*1: CPPM is the copy guard function beforehand written in the disk for protection of copyrights.
*1: CPPM is the copy guard function beforehand written in the disk for protection of copyrights.
37
SA-HT335EE
14.4. Service mode table 2
Pressing various button combinations on the player and remote control unit can activate the service modes.
38
SA-HT335EE
39
SA-HT335EE
14.5. Sales demonstration lock function
This function prevents discs from being lost when the unit is used for sales demonstrations by disabling the disc eject function.
"LOCKED" is displayed on the unit, and ordinary operation is disabled.
"LOCKED" is displayed on the unit, and ordinary operation is disabled.
14.5.1. Setting
· Prohibiting removal of disc
1. Select the DVD/CD function.
2. Press and hold down the
2. Press and hold down the
button on the player and the power button on the remote controller unit for at least three
seconds. (The message, “___LOCKED_” appears when the function is activated.)
Note:
OPEN/CLOSE
button is invalid and the player displays “___LOCKED_” while the lock function mode is entered.
· Prohibiting operation of selector and disk
1. Select the DVD/CD function.
2. Press and hold down the
2. Press and hold down the
button on the player and the power button on the remote controller unit for at least three
seconds. (The message, “___LOCKED_” appears when the function is activated.)
Note:
The following buttons are invalid and the player displays “___LOCKED_” while the lock function mode is entered.
Player
,
,
, INPUT SELECTOR, VOLUME KNOB,
,
Remote
controller unit
TV/VCR, TUNER/BAND, ADVANCED DISC REVIEW, PLAY SPEED QUICK REPLAY, 0~9,
, FL DISPLAY,
MANUAL SKIP, REPEAT,
,
,
,
,
,
, TOP MENU/DIRECT NAVIGATOR,
MENU/PLAYIST, SETUP FUNCTIONS, RETURN, MUTING,
,
,
,
14.5.2. Cancellation
The lock can be cancelled by the same procedure as used in setting. ("UNLOCK" is displayed on cancellation. Disconnecting the
power cable from power outlet does not cancel the lock.)
power cable from power outlet does not cancel the lock.)
14.6. Handling after completing repairs
Use the following procedure after completing repairs.
14.6.1. Method
Confirm that the power is turned on:
1. Press the "OPEN/CLOSE" button to close the tray.
1. Press the "OPEN/CLOSE" button to close the tray.
2. Press the "POWER" button to turn off the power.
3. Disconnect the power plug from the outlet.
14.6.2. Precautions
Do not disconnect the power plug from the outlet with the tray still open, then close the tray manually.
40
SA-HT335EE
Click on the first or last page to see other SA-HT335EE service manuals if exist.