Panasonic SA-BTT500EB / SA-BTT500EE / SA-BTT500EG / SA-BTT560EB / SA-BTT560EG / SC-BTT500EES Service Manual ▷ View online
85
Step 1 Desolder the solder point to open circuit.
Step 2 Connect OPU FFC and remove ESD Prevention Bag
(RPFC0114) from the 45P FFC.
Step 2 Connect OPU FFC and remove ESD Prevention Bag
(RPFC0114) from the 45P FFC.
Step 3 Insert the Traverse Unit underneath of the BD Mecha-
nism chassis.
Caution: During assembling, ensure the Traverse unit do
not hit to the Slide Cam.
nism chassis.
Caution: During assembling, ensure the Traverse unit do
not hit to the Slide Cam.
Step 4 Align the Traverse Unit with the BD Mechanism as
shown.
Caution: During assembling, ensure the Traverse unit do
not hit to the Slide Cam.
shown.
Caution: During assembling, ensure the Traverse unit do
not hit to the Slide Cam.
86
Step 5 Insert the Screwdriver to the Damper and push to fix
Damper with Traverse Unit onto the BD Drive as shown.
Caution: During assembling, ensure the Traverse unit do
not hit to the Slide Cam and ensure Traverse Unit is seated
properly.
Damper with Traverse Unit onto the BD Drive as shown.
Caution: During assembling, ensure the Traverse unit do
not hit to the Slide Cam and ensure Traverse Unit is seated
properly.
Step 6 Push the Slide Cam sidewards.
Step 7 Align the grooves of the Slide Cam with the bosses of
the Mid Base.
the Mid Base.
Step 8 Hold the Slide Cam, slightly pull backward the Mid Base
and insert it into the grooves of the Slide Cam.
and insert it into the grooves of the Slide Cam.
87
Caution: Ensure the Mid Base bosses is seated properly
onto the shaft of the Slide Cam.
onto the shaft of the Slide Cam.
Step 9 Push and press the turning shaft of Mid Base. A “click”
sound is heard when it is fully insert.
sound is heard when it is fully insert.
Step 10 Push and press the turning shaft of Mid Base. A “click”
sound is heard when it is fully insert.
sound is heard when it is fully insert.
Step 11 Slide the Slide Cam until it comes to a stop.
88
Step 12 Insert the 45P FFC into the guides.
Caution: Do not exert strong force during inserting the 45P
FFC into the guides as it may damage or broken.
Caution: Do not exert strong force during inserting the 45P
FFC into the guides as it may damage or broken.
Step 13 Insert the OPU FFC Sheet into the Guide as show. A
“click” sound is heard when the OPU FFC is fully catched.
“click” sound is heard when the OPU FFC is fully catched.
Click on the first or last page to see other SA-BTT500EB / SA-BTT500EE / SA-BTT500EG / SA-BTT560EB / SA-BTT560EG / SC-BTT500EES service manuals if exist.