Panasonic SA-BT735EB / SA-BT735EE / SA-BT735EG / SA-BT735EP / SC-BT735EE Service Manual ▷ View online
45
10.2. Main Components and P.C.B. Locations
46
10.3. Disassembly of Top Cabinet
Step 1 Remove 2 screws.
Step 2 Remove 3 screws.
Step 3 Slightly pull outwards both side of Top Cabinet.
Step 4 Slightly lift both side of Top Cabinet in an outward direc-
tion about 25
tion about 25
°
.
Step 5 Press down the catches one by one.
Caution: To avoid shocked by electricity & injured by high
temperature. DO NOT TOUCH electrical components when
insert hand under the Top Cabinet.
Caution: To avoid shocked by electricity & injured by high
temperature. DO NOT TOUCH electrical components when
insert hand under the Top Cabinet.
Step 6 Remove Top Cabinet as arrow shown.
47
Caution: During assembling, ensure that catches of Top
Cabinet is insert into Front Panel properly.
Cabinet is insert into Front Panel properly.
Caution: Replace Top Cabinet insulator sheet if broken &
ensure it is pasted properly at Top Cabinet.
ensure it is pasted properly at Top Cabinet.
10.4. Disassembly of AC Inlet P.C.B.
• Refer to “Disassembly of Top Cabinet”.
Step 1 Remove 1 screw.
Step 2 Twist the Wire Holder.
Step 3 Release Red(TL10) & Black(TL20) wires from the Wire
Holder.
Caution: During assembling, ensure that Red (TL10) &
Black(TL20) wires are dressed into Wire Holder.
Step 4 Lift up the AC Inlet P.C.B.from the rear panel.
Step 3 Release Red(TL10) & Black(TL20) wires from the Wire
Holder.
Caution: During assembling, ensure that Red (TL10) &
Black(TL20) wires are dressed into Wire Holder.
Step 4 Lift up the AC Inlet P.C.B.from the rear panel.
Step 5 Desolder Red (TL10) & Black (TL20) wires on AC Inlet
P.C.B..
Step 6 Remove AC Inlet P.C.B..
P.C.B..
Step 6 Remove AC Inlet P.C.B..
48
10.5. Disassembly of Optical In
P.C.B.
• Refer to “Disassembly of Top Cabinet”.
Step 1 Remove 2 screws.
Step 2 Detach 13P FFC at the connector (CN4002) on Optical
In P.C.B..
In P.C.B..
Step 3 Slightly pull Optical In P.C.B. outwards as arrow (1)
shown.
Step 4 Press Optical In P.C.B. downwards to release it from the
locator as arrow (2) shown.
Step 5 Remove Optical In P.C.B..
shown.
Step 4 Press Optical In P.C.B. downwards to release it from the
locator as arrow (2) shown.
Step 5 Remove Optical In P.C.B..
10.6. Disassembly of Wireless
Adapter P.C.B.
• Refer to “Disassembly of Top Cabinet”.
Step 1 Remove 1 screw.
Step 2 Press the Transmitter Chassis Unit downward to
release from the catch.
Caution: During assembling, ensure that Transmitter Chas-
sis Unit is properly inserted & fully catched onto Rear
Panel before screwing.
Step 2 Press the Transmitter Chassis Unit downward to
release from the catch.
Caution: During assembling, ensure that Transmitter Chas-
sis Unit is properly inserted & fully catched onto Rear
Panel before screwing.
Step 3 Detach Transmitter Chassis Unit from rear panel.
Step 4 Detach 17P FFC at the connector (CN3001) on Wire-
less Adapter P.C.B..
less Adapter P.C.B..
Click on the first or last page to see other SA-BT735EB / SA-BT735EE / SA-BT735EG / SA-BT735EP / SC-BT735EE service manuals if exist.