Panasonic SA-BT230EB / SA-BT230EE / SA-BT230EG / SA-BT230EP / SA-BT330EB / SA-BT330EG / SA-BT330EP / SC-BT230EE Service Manual ▷ View online
57
10.12. Disassembly of iPod Cradle
Assembly
• Refer to “Disassembly of Front Panel Block Assemb-
ley”.
Step 1 Detach 15P FFC at the connector (CN1002) on iPod/
iPhone P.C.B..
Step 2 Remove 1 screw.
iPhone P.C.B..
Step 2 Remove 1 screw.
Step 3 Open the Front Lid Unit.
Step 4 Open the Cradle Lid.
Step 4 Open the Cradle Lid.
Step 5 Lift up the iPod Cradle Assembly on both sides.
Step 6 Press to release iPod Cradle Assembly from Front
Panel as arrow shown.
Panel as arrow shown.
Step 7 Remove iPod Cradle Assembly.
58
• Assembly of iPod Cradle Assembly
Step 1 Fix the iPod Cradle Assembly to Front Panel.
Step 2 Press the iPod Cradle Assembly downwards.
Note: A “click” sound can be heard when the iPod Cradle
Assembly is fixed onto the Front Panel properly.
Note: A “click” sound can be heard when the iPod Cradle
Assembly is fixed onto the Front Panel properly.
Step 3 Press the catch on the iPod Cradle Assembly.
Step 4 Fix 1 screw.
Step 4 Fix 1 screw.
10.13. Disassembly of iPod/iPhone
P.C.B.
• Refer to “Disassembly of iPod Cradle Assembly”.
Step 1 Remove 2 screws.
Step 2 Remove iPod/iPhone P.C.B..
59
Caution: During assembling, ensure that iPod/iPhone
P.C.B. is seated properly at the locators.
P.C.B. is seated properly at the locators.
10.14. Replacement of DVD Lid Unit
• Refer to “Disassembly of Front Panel Block Assembly”.
10.14.1. Disassembly of DVD Lid Unit
Step 1 Push backward the Shaft B of the DVD Lid Unit in the
direction of arrow.
direction of arrow.
Step 2 Push forward the Shaft B of the DVD Lid Unit in the
direction of arrow.
direction of arrow.
Step 3 Lift the DVD Lid Spring at Shaft A in the direction of
arrow.
arrow.
Step 4 Move the Shaft A of the DVD Lid Unit in the direction of
arrow.
Step 5 Remove DVD Lid Unit.
arrow.
Step 5 Remove DVD Lid Unit.
60
Step 6 Move the DVD Lid Unit to remove from Front Panel.
10.14.2. Assembly of DVD Lid Unit
Step 1 Insert the DVD Lid Unit into the Front Panel as arrow
shown.
Caution: Ensure that Shaft A of DVD Lid Unit is fully
inserted into Slot A of Front Panel.
shown.
Caution: Ensure that Shaft A of DVD Lid Unit is fully
inserted into Slot A of Front Panel.
Step 2 Locate DVD Lid Spring in between ribs of Front Panel.
Step 3 Insert the DVD Lid Unit (Shaft B) into the Front Panel
(Slot B) as arrow shown.
(Slot B) as arrow shown.
Click on the first or last page to see other SA-BT230EB / SA-BT230EE / SA-BT230EG / SA-BT230EP / SA-BT330EB / SA-BT330EG / SA-BT330EP / SC-BT230EE service manuals if exist.