Panasonic SA-BT200EB / SA-BT200EG / SA-BT200P / SA-BT200PC / SA-BT203P / SA-BT205EB / SA-BT205EG / SA-BT205EP / SA-BT205EE / SA-BT205GA / SA-BT205GS / SA-BT207GN / SA-BT300P / SA-BT300PC / SA-BT205GT / SA-BT205PU / SA-BT300PX Service Manual / Supplement ▷ View online
7
1.2.4.
Service Mode Table 4
6. Disc maker ID is displayed for 5
seconds.
seconds.
7. Factor of drive error (hexadeci-
mal) occurring is left displayed.
mal) occurring is left displayed.
In case that the maker cannot be
identified, display is black out.
identified, display is black out.
Item
FL display
Key operation
Mode name
Description
(Remote controller key)
8
1.2.5.
Service Mode Table 5
MMH0907
CEC (H) output
Check of the CEC terminal high output of
HDMI.
HDMI.
Press [5] [5] in service mode.
CEC (L) output
Check of the CEC terminal low output of
HDMI.
HDMI.
Press [5] [6] in service mode.
Tray OPEN/CLOSE Test The DVD drive tray is opened and closed
repeatedly.
*
is number of open/close cycle
times.
Press [9] [1] in service mode
*When releasing this mode, press
the [POWER] button of Remote
Controller more than 10 seconds.
*When releasing this mode, press
the [POWER] button of Remote
Controller more than 10 seconds.
Delete the Laser Used
Time
Time
Laser used time stored in the memory of the
unit is deleted.
unit is deleted.
Press [9] [5] in service mode.
Delete the Last Drive
Error
Error
Delete the Last Drive Error information stored
on the DVD Drive.
on the DVD Drive.
Press [9] [6] in service mode.
Delete the Error History
Delete Error History information stored on the
unit.
unit.
Press [9] [7] in service mode.
Error code initialization
Initialization of the last error code held by
timer (Write in F00)
timer (Write in F00)
Press [9] [8] in service mode.
Initialize
Service
Last Drive Error, Error history and Error
Codes stored on the unit are initialized to fac-
tory setting.
Codes stored on the unit are initialized to fac-
tory setting.
Press [9] [9] in service mode.
Finishing service mode
Release Service Mode.
Display in STOP (SS) mode.
Press power button on the front
panel or Remote controller in ser-
vice mode.
panel or Remote controller in ser-
vice mode.
Item
FL display
Key operation
Mode name
Description
(Remote controller key)
CECLOK
CECHOK
CECLNG
CLR
CLR
CLR
CLR
CLR
CECHNG
8
1.2.5.
Service Mode Table 5
MMH0907
CEC (H) output
Check of the CEC terminal high output of
HDMI.
HDMI.
Press [5] [5] in service mode.
CEC (L) output
Check of the CEC terminal low output of
HDMI.
HDMI.
Press [5] [6] in service mode.
Tray OPEN/CLOSE Test The DVD drive tray is opened and closed
repeatedly.
*
is number of open/close cycle
times.
Press [9] [1] in service mode
*When releasing this mode, press
the [POWER] button of Remote
Controller more than 10 seconds.
*When releasing this mode, press
the [POWER] button of Remote
Controller more than 10 seconds.
Delete the Laser Used
Time
Time
Laser used time stored in the memory of the
unit is deleted.
unit is deleted.
Press [9] [5] in service mode.
Delete the Last Drive
Error
Error
Delete the Last Drive Error information stored
on the DVD Drive.
on the DVD Drive.
Press [9] [6] in service mode.
Delete the Error History
Delete Error History information stored on the
unit.
unit.
Press [9] [7] in service mode.
Error code initialization
Initialization of the last error code held by
timer (Write in F00)
timer (Write in F00)
Press [9] [8] in service mode.
Initialize
Service
Last Drive Error, Error history and Error
Codes stored on the unit are initialized to fac-
tory setting.
Codes stored on the unit are initialized to fac-
tory setting.
Press [9] [9] in service mode.
Finishing service mode
Release Service Mode.
Display in STOP (SS) mode.
Press power button on the front
panel or Remote controller in ser-
vice mode.
panel or Remote controller in ser-
vice mode.
Item
FL display
Key operation
Mode name
Description
(Remote controller key)
CECLOK
CECHOK
CECLNG
CLR
CLR
CLR
CLR
CLR
CECHNG
8
1.2.5.
Service Mode Table 5
MMH0907
CEC (H) output
Check of the CEC terminal high output of
HDMI.
HDMI.
Press [5] [5] in service mode.
CEC (L) output
Check of the CEC terminal low output of
HDMI.
HDMI.
Press [5] [6] in service mode.
Tray OPEN/CLOSE Test The DVD drive tray is opened and closed
repeatedly.
*
is number of open/close cycle
times.
Press [9] [1] in service mode
*When releasing this mode, press
the [POWER] button of Remote
Controller more than 10 seconds.
*When releasing this mode, press
the [POWER] button of Remote
Controller more than 10 seconds.
Delete the Laser Used
Time
Time
Laser used time stored in the memory of the
unit is deleted.
unit is deleted.
Press [9] [5] in service mode.
Delete the Last Drive
Error
Error
Delete the Last Drive Error information stored
on the DVD Drive.
on the DVD Drive.
Press [9] [6] in service mode.
Delete the Error History
Delete Error History information stored on the
unit.
unit.
Press [9] [7] in service mode.
Error code initialization
Initialization of the last error code held by
timer (Write in F00)
timer (Write in F00)
Press [9] [8] in service mode.
Initialize
Service
Last Drive Error, Error history and Error
Codes stored on the unit are initialized to fac-
tory setting.
Codes stored on the unit are initialized to fac-
tory setting.
Press [9] [9] in service mode.
Finishing service mode
Release Service Mode.
Display in STOP (SS) mode.
Press power button on the front
panel or Remote controller in ser-
vice mode.
panel or Remote controller in ser-
vice mode.
Item
FL display
Key operation
Mode name
Description
(Remote controller key)
CECLOK
CECHOK
CECLNG
CLR
CLR
CLR
CLR
CLR
CECHNG
Display