Panasonic SA-AK340EE Service Manual ▷ View online
Step 4 Remove the traverse deck.
Note: As floating springs (4 pieces) come off at the same time,
be careful not to lose them.
Note: As floating springs (4 pieces) come off at the same time,
be careful not to lose them.
Step 5 Remove 3 screws.
Step 6 Remove the CD Servo P.C.B. and turn it over.
Note: Insert a short pin into FFC of the optical pickup.
Step 7 Rotate the traverse deck (B) to the arrow direction and
shift the optical pickup to the furthest backward.
Step 6 Remove the CD Servo P.C.B. and turn it over.
Note: Insert a short pin into FFC of the optical pickup.
Step 7 Rotate the traverse deck (B) to the arrow direction and
shift the optical pickup to the furthest backward.
Step 8 Remove the catch of the drive rack, and take out the
drive rack.
drive rack.
Step 9 Place the convex part of an optical pickup to the
concave part of a traverse base, then take out the optical
pickup.
concave part of a traverse base, then take out the optical
pickup.
33
SA-AK340EE
34
SA-AK340EE
* The mechanism as shown below is for DECK1. For DECK
2, perform the same procedures.
2, perform the same procedures.
Step 1 Detach the head block connector (Deck P.C.B.).
Step 2 Desolder wire(W1002) at motor assembly.
Step 3 Remove Deck P.C.B.
Step 2 Desolder wire(W1002) at motor assembly.
Step 3 Remove Deck P.C.B.
Step 1 Release the catch, and then remove the pinch roller (F).
Step 2 Release 2 claws and detach the head block connector.
Step 2 Release 2 claws and detach the head block connector.
Step 3 Remove 2 screws.
Step 4 Remove head block.
Step 4 Remove head block.
Step 4 Remove 3 screws (for deck 1 & 2).
Step 5 Remove capstan belt A/B.
Step 5 Remove capstan belt A/B.
10.16. Disassembly of Deck Mechanism
· Follow the (Step 1) - (Step 2) of Item 10.4 - Disassembly of Top Cabinet
· Follow the (Step 1) - (Step 4) of Item 10.6 - Disassembly of CD Changer Unit
· Follow the (Step 1) - (Step 4) of Item 10.10 - Disassembly of Front Panel Unit
· Follow the (Step 1) - (Step 5) of Item 10.12 - Disassembly of Deck Mechanism Unit
· Follow the (Step 1) - (Step 4) of Item 10.6 - Disassembly of CD Changer Unit
· Follow the (Step 1) - (Step 4) of Item 10.10 - Disassembly of Front Panel Unit
· Follow the (Step 1) - (Step 5) of Item 10.12 - Disassembly of Deck Mechanism Unit
10.16.1. Disassembly of the pinch roller ass’y and head block
10.16.2. Disassembly of capstan motor ass’y, capstan belt A, capstan belt B and winding
belt
35
SA-AK340EE
Step 6 Remove the flywheel R.
Step 7 Release the claw and remove the winding lever and
spring.
[Installation of the belt]
Step 1 The boss and marking should be positioned
horizontally.
Step 7 Release the claw and remove the winding lever and
spring.
[Installation of the belt]
Step 1 The boss and marking should be positioned
horizontally.
Step 2 Put the winding belt on the pulley temporarily.
Step 3 Install the flywheel F.
Step 4 Put the winding belt on the flywheel F.
Step 5 Install the winding lever and spring while pressing the
winding arm in the direction of arrow.
Step 6 Install the flywheel R.
Step 3 Install the flywheel F.
Step 4 Put the winding belt on the flywheel F.
Step 5 Install the winding lever and spring while pressing the
winding arm in the direction of arrow.
Step 6 Install the flywheel R.
36
SA-AK340EE
Click on the first or last page to see other SA-AK340EE service manuals if exist.