Panasonic SA-AK240E / SA-AK240EB / SA-AK240EG Service Manual ▷ View online
Step 1 Disconnect connectors (CN2803, CN2806, CN2951,
CN5950 & CN5951).
CN5950 & CN5951).
Step 2 Bent the front panel unit slightly forward as arrow
shown.
shown.
Step 3 Release 2 claws outwards.
10.10. Disassembly of Front Panel Unit
· Follow the (Step 1) - (Step 2) of Item 10.4 - Disassembly of Top Cabinet
· Follow the (Step 1) - (Step 4) of Item 10.6 - Disassembly of CD Changer Unit
· Follow the (Step 1) - (Step 4) of Item 10.6 - Disassembly of CD Changer Unit
29
SA-AK240E / SA-AK240EB / SA-AK240EG
Step 4 Remove the front panel unit.
Note: Ensure 2 claws located at the bottom chassis is seated
into the 2 slots at bottom of front panel at 2 catches (one on
Note: Ensure 2 claws located at the bottom chassis is seated
into the 2 slots at bottom of front panel at 2 catches (one on
Step 1 Remove the volume knob.
Step 2 Remove 12 screws.
Step 3 Release 2 catches.
Step 4 Remove Panel P.C.B..
Step 4 Remove Panel P.C.B..
10.11.1. Disassembly of Lid
Step 1 Lift the spring sideward.
each side) of bottom chassis to be aligned to front panel’s slot.
Assembly is secured upon hearing clicking sound.
Assembly is secured upon hearing clicking sound.
Step 2 Remove Lid.
Note: Do not misplace the spring.
Note: Do not misplace the spring.
10.11. Disassembly for Panel P.C.B.
· Follow the (Step 1) - (Step 2) of Item 10.4 - Disassembly of Top Cabinet
· Follow the (Step 1) - (Step 4) of Item 10.6 - Disassembly of CD Changer Unit
· Follow the (Step 1) - (Step 4) of Item 10.10 - Disassembly of Front Panel Unit
· Follow the (Step 1) - (Step 4) of Item 10.6 - Disassembly of CD Changer Unit
· Follow the (Step 1) - (Step 4) of Item 10.10 - Disassembly of Front Panel Unit
30
SA-AK240E / SA-AK240EB / SA-AK240EG
Step 1 Detach FFC cable (CN971).
Step 2 Disconnect FFC cable (CN1001).
Step 3 Remove the 5 screws.
Step 2 Disconnect FFC cable (CN1001).
Step 3 Remove the 5 screws.
Step 1 Remove 2 screws.
Important notes: Ensure all the trays are in the “STOCK”
position before proceeding to the disassemble of traverse
unit. For procedures to set the trays in “STOCK” position,
please refer to original Service Manual for CRS1, Section 7.
Disassembling Procedure When Tray In Play Position,
Order No. MD0509368C0.
position before proceeding to the disassemble of traverse
unit. For procedures to set the trays in “STOCK” position,
please refer to original Service Manual for CRS1, Section 7.
Disassembling Procedure When Tray In Play Position,
Order No. MD0509368C0.
Step 4 Push the lever upward, and then open the cassette lid
ass’y (For DECK1 and DECK2).
ass’y (For DECK1 and DECK2).
Step 5 Tilt the cassette mechanism unit in the direction of
arrow (1), and then remove it in the direction of arrow (2).
Note: For disassembly of parts for deck mechanism unit,
refer to Section 10.15.
arrow (1), and then remove it in the direction of arrow (2).
Note: For disassembly of parts for deck mechanism unit,
refer to Section 10.15.
Step 2 Desolder wire at deck motor terminals (W1002).
Step 3 Remove Deck P.C.B.
10.12. Disassembly of Deck mechanism unit
· Follow the (Step 1) - (Step 2) of Item 10.4 - Disassembly of Top Cabinet
· Follow the (Step 1) - (Step 4) of Item 10.6 - Disassembly of CD Changer Unit
· Follow the (Step 1) - (Step 4) of Item 10.10 - Disassembly of Front Panel Unit
· Follow the (Step 1) - (Step 4) of Item 10.6 - Disassembly of CD Changer Unit
· Follow the (Step 1) - (Step 4) of Item 10.10 - Disassembly of Front Panel Unit
10.13. Disassembly of Deck P.C.B.
· Follow the (Step 1) - (Step 2) of Item 10.4 - Disassembly of Top Cabinet
· Follow the (Step 1) - (Step 4) of Item 10.6 - Disassembly of CD Changer Unit
· Follow the (Step 1) - (Step 4) of Item 10.10 - Disassembly of Front Panel Unit
· Follow the (Step 1) - (Step 4) of Item 10.6 - Disassembly of CD Changer Unit
· Follow the (Step 1) - (Step 4) of Item 10.10 - Disassembly of Front Panel Unit
10.14. Disassembly of Traverse Unit
· Follow the (Step 1) - (Step 2) of Item 10.4 - Disassembly of Top Cabinet
· Follow the (Step 1) - (Step 4) of Item 10.6 - Disassembly of CD Changer Unit
· Follow the (Step 1) - (Step 4) of Item 10.6 - Disassembly of CD Changer Unit
31
SA-AK240E / SA-AK240EB / SA-AK240EG
Step 1: Press and hold the plunger lever and rotate the
gear as arrows shown until it stop.
gear as arrows shown until it stop.
Step 2: Push the traverse slide plate as arrow shown to
release the traverse unit.
Caution: Do not exert strong force on the traverse
slide plate.
release the traverse unit.
Caution: Do not exert strong force on the traverse
slide plate.
Step 3: Remove the traverse unit as arrow shown.
· Assembly of Traverse Unit
Step 1: Turn over the unit and install the traverse unit.
32
SA-AK240E / SA-AK240EB / SA-AK240EG
Click on the first or last page to see other SA-AK240E / SA-AK240EB / SA-AK240EG service manuals if exist.