DOWNLOAD Panasonic RR-XS600E / RR-XS600PP Service Manual ↓ Size: 4.07 MB | Pages: 69 in PDF or view online for FREE

5

The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this
equipment in considering the globally environmental conservation.

The normal solder is the alloy of tin (Sn) and lead (Pb). On the other hand, the lead free solder is the alloy mainly consists of tin
(Sn), silver (Ag) and Copper (Cu), and the melting point of the lead free solder is higher approx.30 degrees C (86

°F) more than that

of the normal solder.

• The lead free solder has to be used when repairing the equipment for which the lead free solder is used.

(Definition: The letter of “PbF” is printed on the PCB using the lead free solder.)

• To put lead free solder, it should be well molten and mixed with the original lead free solder.
• Remove the remaining lead free solder on the PCB cleanly for soldering of the new IC.
• Since the melting point of the lead free solder is higher than that of the normal lead solder, it takes the longer time to melt the

lead free solder.

• Use the soldering iron (more than 70W) equipped with the temperature control after setting the temperature at 350±30 degrees

C (662±86

°F).

• The following 3 types of lead free solder are available through the service parts route.

RFKZ03D01K-----------(0.3mm 100g Reel)
RFKZ06D01K-----------(0.6mm 100g Reel)
RFKZ10D01K-----------(1.0mm 100g Reel)

* Ingredient: Tin (Sn), 96.5%, Silver (Ag) 3.0%, Copper (Cu) 0.5%, Cobalt (Co) / Germanium (Ge) 0.1 to 0.3%

The letter of “PbF” is printed either foil side or components side on the PCB using the lead free solder.
(See right figure)

6

This service manual contains technical information which will allow service personnel’s to understand and service this model.
If the circuit is changed or modified, this information will be followed by supplement service manual to be filled with original service
manual.

1. The following components are supplied as an assembled part.

• Micro-processor IC, IC601 (RFKWNXS600D0).

Serial Number is required to obtain the Firmware Updates.

To obtain updated Firmware version and procedures for updating, please refer to item 6.2. 

7

Q

DC 3.0 V (2 AAA LR03 batteries)

Q

PCM : 44.1 kHz/44.1 kHz

XP: 44.1 kHz/44.1 kHz

LP: 22.05 kHz/16 kHz

SLP: 8 kHz/8 kHz

Linear PCM (16 bit), MP3

8 kbps to 320 kbps (MP3)

8 kHz to 48 kHz

(MP3)

PCM : 90 Hz to 20,000 Hz

XP: 90 Hz to 15,100 Hz

LP: 90 Hz to 6,700 Hz

SLP: 90 Hz to 2,900 Hz

41 dB (PCM) Filter (JIS A)

Q

USB2.0 (Hi-Speed) DC 5 V / 150 mA

Q

ø 3.5 mm (1.8”), 16 

Ω, Max: 3 mW

ø 20 mm (25/32”), 8 

Ω, Max: 330 mW

Q

ø 3.5 mm (1/8”);

0.80 mV plug in power

4 GB*

1

0

°C to 40°C (32°F to 104°F)

20% to 80% (non-condensing)

*

1  

GB means one billion bytes. Usable capacity will be less.

Q

 Battery life (may be less depending on the operating conditions.)

Stereo

PCM

PCM

approx. 22 h.

approx. 35 h.

XP

MP3

approx. 27 h.

approx. 45 h.

LP

approx. 30 h.

approx. 45 h.

SPL

approx. 33 h.

approx. 45 h.

Monaural

PCM

PCM

approx. 32 h.

approx. 35 h.

XP

MP3

approx. 37 h.

approx. 45 h.

LP

approx. 46 h.

approx. 45 h.

SPL

approx. 50 h.

approx. 45 h.

Using Panasonic Alkaline (AAA LR3) batteries.
*

2  

When zoom microphone is off.

*

3  

When audio is output from speaker (Volume: 13, EQ: off, playback 

speed control: 100%).

Q

 Standard recordable time (may be less depending on the operat-

ing conditions.)

Stereo

PCM

PCM

approx. 6 h. 10 min.

1411 kbps

XP

MP3

approx. 68 h. 30 min.

128 kbps

LP

approx. 137 h. 00 min.

64 kbps

SPL

approx. 548 h. 20 min.

16 kbps

Monaural

PCM

PCM

approx. 12 h. 20 min.

705 kbps

XP

MP3

approx. 137 h. 00 min.

64 kbps

LP

approx. 274 h. 10 min.

32 kbps

SPL

approx. 1096 h. 50 min.

8 kbps

Q

40.4 mm x 110.6 mm x 16.8 mm

(1-19/32” x 4-11/32” x 21/32”)

39.0 mm x 110.1 mm x 15.1 mm

(1-17/32” x 4-11/32” x 19/32”)

Q

Approx. 64 g (2.26 oz.) with battery

Approx. 42 g (1.49 oz.) without battery

Specifications are subject to change without notice.

Q

Computer IBM PC/AT compatible machines, Macintosh

• Windows® 2000 Professional SP4
• Windows® XP Home Edition/Professional 
and SP2, SP3
• Windows Vista® Home Basic/Home Pre-
mium/Business/Ultimate and SP1, SP2
• Windows® 7 Starter/Home Basic/Home 
Premium/Professional/Ultimate (E)
• Windows® 7 Starter/Home Premium/Pro-
fessional/Ultimate (PP)

Pre-installed
version

Mac OS X 10.2.8 - 10.6

USB port
(Operation cannot be guaranteed if you 
use a USB hub or extension cable.)

8